As the driver has a new Capabilities, profiles and changes in preferences the update will not be done automatically .
To facilitate the update, I am going to change driver version 4.0 to the name Zigbee SwitchMc-(OLD).
I will publish the new version 5 with the original name Zigbee Switch Mc
In this way, your driver installed will renamed with (OLD), indicating that there is a new version available and you can install the new version with a driver change whenever you want.
Power and energy events can be captured in a google sheet with the smart app simple event logger.
With this you can perform calculations by device, periods, totals …
Can you please include these two sockets in the driver with consumption metering?
Metrics
Last Hop LQI: 220
Last Hop RSSI: -45
Received Messages From Device: 5808
Received Messages From Device (Duplicates): 83
Messages Transmitted to Device: 5908
Messages Transmitted to Device (Failures): 2
Updated Time: 2022-01-07 8:41 AM BRT
Date
application: 41
endpointId: 01
manufacturer: _TZ3000_vtscrpmw
model: TS0121
zigbeeNodeType: ROUTER
Raw Description 01 0104 0051 01 06 0000 0004 0005 0006 0702 0B04 02 0019 000A
Metrics
Last Hop LQI: 196
Last Hop RSSI: -51
Received Messages From Device: 5102
Received Messages From Device (Duplicates): 99
Messages Transmitted to Device: 5190
Messages Transmitted to Device (Failures): 0
Updated Time: 2022-01-07 8:42 AM BRT
Date
application: 41
divider: 1
endpointId: 01
manufacturer: _TZ3000_rdtixbnu
model: TS0121
zigbeeNodeType: SLEEPY_END_DEVICE
Raw Description 01 0104 0051 01 06 0000 0004 0005 0006 0702 0B04 02 0019 000A
I found the ID in yet another item sold (a picture of the graph from ConBee), but now I can’t find the link to that one anymore.
I have also noted that this plug has a driver for ConBee since end of november. They added it with a bit of problem, some smaller bugs appeared with energy reporting.
Anyways, the form factor of this plug is exactly what I need and it must be ZigBee…
I will order a few and help out testing them, as long as I know that I get help integrating them…
I have old (2015?) SmartThings Power Plug which I deleted from SmartThings to see if it has Edge driver available. It pairs with wrong driver (Aqara) and does not work, but I was able to get some information about it;
Added to this driver version of swit with power and energy
I don’t know if it will measure the power and consumption well. Smartthings have made changes in the libraries and I still don’t know what changes they are
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Switch Power Mc │
│ Version │ 2022-01-20T15:21:21.794641 │
└─────────────┴──────────────────────────────────────┘
Hello @Mariano_Colmenarejo
Today within my isolation (covid-yay) i ended up with wiring a ZIGBEE DIMMER MODULE MS-105Z from Moes. No luck with few options tried within Smartthings. Is it possible to add it to your EDGE drives or do i have to look for DTH ?
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Switch Power Mc │
│ Version │ 2022-01-25T13:08:37.698155 │
└─────────────┴──────────────────────────────────────┘
Hello
Is it possible to ad this Blitzwolf SHP13 zigbee plug with
Data
application: 41
divisor: 10
endpointId: 01
firmwareImageType: 5634
firmwareManufacturerCode: 4098
manufacturer: _TZ3000_g5xawfcq
model: TS0121
zigbeeNodeType: ROUTER
Added to this new driver version with Groups functions
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Switch Power Mc │
│ Version │ 2022-01-26T18:22:17.045126 │
└─────────────┴──────────────────────────────────────┘
