(EDGE Driver-Mc): Z-Wave Edge Drivers and others with FIBARO devices:

Mariano_Colmenarejo · February 11, 2022, 5:48pm

(New Release) Edge Driver Z-Wave Switch Mc with more Fibaro Devices:

At the request of a user who wanted to use Fibaro devices that were not in the stock driver:

Dimmer-2 FGD-212
Dimmer-1 FGD-211
Relay Switch FGS-212
Double Relay Switch FGS-222
Roller Shutter 2 (FGR-222)
Roller Shutter 3 (FGR-223)
Wall Plug – type E/F (FGWPE-102 | FGWPF-102) ProductType: 0602
Wall Plug – type E/F (FGWPE-102 | FGWPF-102) ProductType: 0600
Smart Module (FGS-214)
Fibaro RGBW Controller FGRGBWM-441 (driver Z-Wave Bulb Mc)
Fibaro RGBW Controller 2, model 442 (driver Z-Wave Bulb Mc)
Zooz RGBW Dimmer Zen31 (driver Z-Wave Bulb Mc)
Fibaro Smart Implant FGBS-222
Fibaro Smart Implant FGBS-222 driver v6

I have added them to the stock beta driver Z-Wave Switch, creating 3 new profiles with their main preferences.

Dimmer-2 FGD-212

Double Relay Switch FGS-222

Relay Switch FGS-212

This driver has all devices of smartThings stock beta driver and the three new Fibaro devices.

Tested, they work well and I want to share them in case someone also needs them for these devices that are not in the stock driver and some, like the relays, are old and do not have official DTH either.

Link to the shared channel

SmartThings. Add a little smartness to your things

I added Mc so that the name of the stock driver differs

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Z-Wave Switch Mc                     │
│ Version     │ 2022-02-11T17:38:39.435083           │
└─────────────┴──────────────────────────────────────┘

I don’t know if someone from Fibaro will be working on updating their devices that are not in the stock Beta Edge drivers.
Just to tell you that now with Edge drivers it is very easy for you to provide a good service to your many smartThings customers.
Updating them and adding parameter settings in preferences is a matter of investing very little time, almost everything is done in the default libraries and stock drivers.
The cost of the certifications of course, is another matter

FIBARO ROLLER SHUTTER 2 (FGR-222)

I have added them to the stock beta driver Z-Wave Window Treatment, creating new profile with their main preferences.

After installation need perform a calibration, parameter 29 set to 1, for works as Roller blind (with positioning).

The option Venetian Blind is not added :
Reading the fibaro documentation I think it only works with fibaro zwave commands, configuration parameter 3, value 1 and in its own hub.
(If not and I’m wrong, this option could be added just like the Fibaro Walli).

This is the version of the driver, which includes all the devices of the stock beta driver and the Fibaro FGR-222

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Z-Wave Window Treatment Mc           │
│ Version     │ 2022-02-13T17:31:33.394807           │

I have added Mc to the name to differentiate it from the stock driver

Link to supported devices Z-Wave Switch and Child Mc
Link to supported devices Z-Wave Bulb Mc
Link to supported devices Z-Wave Button Mc
Link to supported devices Z-Wave Siren Mc
Link to supported devices Z-Wave Smoke Alarm-Mc
Link to supported devices Z-Wave Window Treatment Mc

NickA · February 12, 2022, 4:16am

I will try these in the morning.

Automated_House · February 12, 2022, 4:24am

In the mean time, I think you should post a PayPal or Venmo link so people can buy you a coffee. I think there are plenty of SmartThings users using your drivers that would be willing to throw you a Starbucks to thank you for your work.

Mariano_Colmenarejo · February 12, 2022, 10:21am

Thank you for your words,

With a thank you or and knowing that can help someone in need is enough.

The little I know about home automation I learned here, so coming back here seems right to me.

By the way, I only added the EU 1002 model of the FGS-222 and FGS-212 relays. If it exists and someone knows the US and AU codes, I’ll add them.

From dimmer-2 I added the three models 1000, 2000 and 3000

NickA · February 12, 2022, 3:56pm

I tried both the single and double switch, and they work well. FYI SmartThings also added the updated driver on February 8 2022. I’m adding the dimmer right now.

As always thanks for all your input.

For the switches your driver and the Smartthings driver appear identical, but for the dimmer yours exposes the settings and shows power and energy, while Smartthings does not.

fido · February 12, 2022, 5:40pm

Which gives much hope to RGBW 441/2 owners, these settings used by Fibaro are not usually accessible with an ST driver

Mariano_Colmenarejo · February 13, 2022, 5:40pm

(New Release) Edge Driver Z-Wave Window Treatment Mc with more Fibaro Devices:

I have changed the title of the thread to Beta Edge Drivers Z-Wave with Fibaro devices

At the request of a user who wanted to use Fibaro devices that were not in the stock driver:

FIBARO ROLLER SHUTTER 2 (FGR-222)

I have added them to the stock beta driver Z-Wave Window Treatment, creating new profile with their main preferences.

After installation need perform a calibration, parameter 29 set to 1, for works as Roller blind (with positioning).

The option Venetian Blind is not added:
Reading the fibaro documentation I think it only works with fibaro zwave commands, configuration parameter 3, value 1 and in its own hub.
(If not and I’m wrong, this option could be added just like the Fibaro Walli).

This is the version of the driver, which includes all the devices of the stock beta driver and the Fibaro FGR-222

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Z-Wave Window Treatment Mc           │
│ Version     │ 2022-02-13T17:31:33.394807           │

I have added Mc to the name to differentiate it from the stock driver

Mariano_Colmenarejo · February 14, 2022, 4:26pm

I have updated the driver Z-Wave Window Treatment Mc to add parameter 17 in preferences:
Parameter 17: when parameter 10 set to 0, 1 determines Roller Shutter relays are turned off after reaching a limit switch:0-255 (0-25,5s). 0 = disabled function

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Z-Wave Window Treatment Mc           │
│ Version     │ 2022-02-14T16:14:08.998773           │
└─────────────┴──────────────────────────────────────┘

Would anyone be interested in adding the Fibaro Roller Shutter 3, FGR-223?
If so, send me the fingerprints and I will do it as soon as I can

dotan_shai · February 15, 2022, 5:53pm

FGR-223 is very welcom, here is my FingerPrint:
Raw Description zw:Ls type:1106 mfr:010F prod:0303 model:1000 ver:5.01 zwv:6.02 lib:03 cc:5E,55,98,9F,56,6C,22 sec:26,85,8E,59,86,72,5A,73,32,70,71,75,60,5B,7A role:05 ff:9900 ui:9900 epc:2

Please note diffent registers from FGR-222

FGS-223 and FGS-224 is also welcome… NO FP for 224… This is for FGS-223
Raw Description zw:Ls type:1001 mfr:010F prod:0203 model:1000 ver:3.02 zwv:4.05 lib:03 cc:5E,86,72,59,73,22,56,32,71,98,7A sec:25,5A,85,70,8E,60,75,5B secOut:26 role:05 ff:8700 ui:8700 epc:2 ep:[‘1001 5E,86,25,85,59,8E,32,EF,26’]

Mariano_Colmenarejo · February 15, 2022, 6:36pm

This already exists in the stock driver.
I’ve been using it for a month or so
It works fine, but it has 6 buttons, which must correspond to the scenes.
The fact that they are in the details view does not make much sense

Mariano_Colmenarejo · February 15, 2022, 6:42pm

If this is more similar to the walli in the configuration.
I will also put the Venetian blind option like the walli
When I have a while I’ll do it and you try it

Mariano_Colmenarejo · February 16, 2022, 5:48pm

Added Fibaro Roller Shutter 3 (FGR-223) to Z-Wave Window Treatment Mc driver

Since I cannot test it and in case it has any errors, I have created another version with a different ID for Z-Wave Window Treatment Mc so that it does not affect those who already have the version with the FGR-222 installed, which is now called Z-Wave Window Treatment Mc-(OLD)

Those who already have the (OLD) version installed with the FGR-222, can change to this new driver whenever they want.

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Z-Wave Window Treatment Mc           │
│ Version     │ 2022-02-16T16:55:00.02404            │
└─────────────┴──────────────────────────────────────┘

I have added the configuration parameters, similar to the Walli Roller Shutter. These are:

  FIBARO_3 = {
    MATCHING_MATRIX = {
      mfrs = 0x010F,
      product_types = 0x0303,
      product_ids = 0x1000,
    },
    PARAMETERS = {
      switchType =                {parameter_number = 20, size = 1},
      calibration =               {parameter_number = 150, size = 1},
      operatingMode =             {parameter_number = 151, size = 1},
      venetianBlindTurnTime =     {parameter_number = 152, size = 4},
      delayAtEndSwitch =          {parameter_number = 154, size = 2},
      motorEndMoveDetection =     {parameter_number = 155, size = 2},
      timeUpMovement =            {parameter_number = 156, size = 4},
      inputsOrientation =         {parameter_number = 24, size = 1},
      outputsOrientation =        {parameter_number = 25, size = 1},
      powerWithSelfConsumption =  {parameter_number = 60, size = 1},
      powerReportsOnChange =      {parameter_number = 61, size = 2},
      powerReportsPeriodic =      {parameter_number = 62, size = 2},
      energyReportsOnChange =     {parameter_number = 65, size = 2},
      energyReportsPeriodic =     {parameter_number = 66, size = 2}
    }
  },

You may need to perform a calibration after installing it. It is done in preferences setting the parameter 150, value = 2

When Venetian blind is chosen in preferences, it switches to a different profile, which shows the controls of this type of blind as another component of the device.

I hope everything works fine, fatal errors do not have that is already tested.

jolerius · February 17, 2022, 9:28am

i cant get the hold on how to change my fibaro double switch to this driver? How do i do that?

Alwas · February 17, 2022, 10:13am

Use the above link to enroll in the channel and install the driver on your hub.
Use the SmartThings app to exclude your device.
If you have any custom Groovy DTHs installed that have the device’s fingerprint, either delete the DTH or comment out the fingerprint by using “//” on fingerprint line.
Use Add device → Scan nearby in the SmartThings app to include your device. Your device should pick up this driver if the fingerprint matches.

Mariano_Colmenarejo · February 19, 2022, 1:56pm

Fixed problem with preferences and profiles for Fibaro Plug Typr E/F Product Type 0602 and Product Id 1001 and 1003

Wall Plug – type E/F

FGWPE-102 | FGWPF-102

Also added to preferences parameters 10 - High priority power report and 13 - Energy reporting threshold

Last driver version

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Z-Wave Switch Mc                     │
│ Version     │ 2022-02-19T12:39:07.4147             │
└─────────────┴──────────────────────────────────────┘

lewisburgess · February 19, 2022, 5:17pm

Hi,

I’m seeing some odd behaviour with my Fibaro Dimmer 2 and this driver.

S2 is either toggling the app to show the device is on or off (even if the physical state doesn’t change), or it is dimming the lights.

S1 with synchronised state for toggle switches is unreliable.

Sometimes S1 switches the load on, but not off. S2 toggles dimming steps.

I have S2 scene activation on. I use this to control some other devices via the hub - the dimmer was previously using a stock pre-Edge driver and I was using Webcore to use the scene to toggle a script (flipping between scene ID 20 and 21).

Ideally this driver would allow S1 to toggle on and off synchronised with a toggle switch. S2 would activate a scene and not control the load of S1.

In a perfect world, it would be great if S2 could be seen as a separate button so ST routines could be used to control devices independently of a load attached to S1.

Thanks, though! Really glad the Fibaro Dimmer 2 has seen some attention - I’ve got loads of these and Fibaro don’t seem to have shown any signs of an official Edge driver.

Mariano_Colmenarejo · February 19, 2022, 5:33pm

@lewisburgess,

I can’t help you much in this case as I don’t have the device.

I added a button as capability, which should be the one used to send the value (1 click, 2 click…) for the scene, depending on the type of switch selected, momentary or toggle.

If someone is using it, can you help?

lewisburgess · February 19, 2022, 5:47pm

Hi,

It seems that the button state shows pushed/held regardless of S1 or S2 being pressed.

Other than the scene activation, it is definitely not right - the S1 button isn’t working correctly- it might be because I reset the dimmer.

Would it be possible to added parameters 1, 2, 20, 26, 28, 29 from this list? Advanced parameters | FIBARO Manuals

I’m going to reset the dimmer and manually set some parameters then try your driver again to see if it behaves more like the classic driver. Thankfully, I can still switch back to the classic one as the Z-Wave ID seems to have stayed as 1D.

Mariano_Colmenarejo · February 19, 2022, 5:53pm

If you are using the Z-Wave Switch Mc driver these parameters are available in preferences

 },
  FIBARO_DIMMER = {
    MATCHING_MATRIX = {
      mfrs = 0x010F,
      product_types = 0x0102,
      product_ids = {0x1000, 0x2000, 0x3000}
    },
    PARAMETERS = {
      restoreState = {parameter_number = 9, size = 1},
      autoOffTimer = {parameter_number = 10, size = 2},
      switchType = {parameter_number = 20, size = 1},
      doubleClickOption = {parameter_number = 23, size = 1},
      threeWaySwitch = {parameter_number = 26, size = 1},
      sceneActivation = {parameter_number = 28, size = 1},
      onOffMode = {parameter_number = 32, size = 1},
      activePowerReports = {parameter_number = 50, size = 2},
      periodicPowerReports = {parameter_number = 52, size = 2},
      energyReports = {parameter_number = 53, size = 2}
    }
  },

lewisburgess · February 19, 2022, 6:49pm

I had to factory reset my test one as it just would not exclude / include properly. I think it would work OK with S1 again now, but I’ve reverted back to the stock classic driver as I think, like you, S2 will be an issue.

I’ll give it a few weeks to see if ST make any changes.

Hopefully still plenty of time before they close the door on non-Edge stuff - doesn’t seem quite ready to come out of beta yet.

Topic		Replies	Views
Driver fibaro RGBW 442 CONTROLLER 2 Devices & Integrations	1	1112	October 19, 2022
Fibaro Relay Switch 1x3kW FGS-211 Device Driver Devices & Integrations	9	423	April 4, 2023
[ST Edge] Driver for FIBARO Smart Module and Double Smart Module (beta) Devices & Integrations edge-device , edge-lighting	0	664	September 11, 2022
Fibaro fgs222 not working since move to edge drivers Devices & Integrations	1	218	January 7, 2024
How to connect my Fibaro FGR 222 to smart things Devices & Integrations	18	1720	August 22, 2022

(EDGE Driver-Mc): Z-Wave Edge Drivers and others with FIBARO devices:

Related topics