Hi all, I have three Fibaro Motion Sensors. One of them I successfully added with the edge driver. The other two constantly fail - meaning when including not sensor is not connected with the edge drive but with the ‘legacy’ instead. So what can I do to change that? I need help here as the legacy st…

Awesome, I just ordered one a Fibaro Motion sensor so I could use the light sensor. I hope you find a way to figure it out.

I have 1, had to delete all my old DTHs to get it to pair, and the ST Edge drive for it is a joke and you loose all the advance settings

agree - it’s really ppor what service is available here. I’m considering to change the system.

I just got my unit delivered, and well. 1. the range sucks compared to the GoControl cheap ones. Motion lights do work locally, but I have had 1 luminance update in a day and that was massively wrong, and it will not update settings for LED color and so on. So unless something happens very quick, …

agree - the driver for the fibaro motion sensor is crappy. I see that with the one I was able to connect. Well, at least it works slightly better than with the old DTH. and the support here is very poor.

I guess you tried a different driver ?

Try @Mariano_Colmenarejo driver if the fingerprint is not already in there i am sure if you ask nicely he will do his best to include it [image] (EDGE Driver-Mc): Z-Wave Edge Drivers and others with FIBARO devices: Community Created Device Types (New Release)…

Sometime whilst I was taking a sleep, the settings on the motion sensor did update. So now the LED color is correct and the illuminance is updating. However my living room reports a level of zero when pitch black, but with all the lights on in that room maxed out at 28 or 32000 when I think it shoul…

I do not have an option to change the driver, unless their is a place to change them that I do not know about?

Device page > top right 3 dots > driver > select different driver [Screenshot_20230128_153433_SmartThings] [Screenshot_20230128_153443_SmartThings]

Include Fibaro Motion Sensor with Edge drive fails

Devices & Integrations

fido (Mike ) January 28, 2023, 9:10am 8

Try @Mariano_Colmenarejo driver if the fingerprint is not already in there i am sure if you ask nicely he will do his best to include it

Topic		Replies	Views
[ST EDGE] Fibaro motion sensor FGMS-001 driver differences Devices & Integrations	12	1261	February 28, 2025
Motion / Lux / Temp sensors Devices & Integrations	40	1823	September 23, 2022
Use DH when edge driver is installed? Connected Things	9	1500	July 16, 2022
Fibaro Fire Alarms dead after update? Devices & Integrations	17	664	June 11, 2023
(EDGE Driver-Mc): Z-Wave Edge Drivers and others with FIBARO devices: Community Created Drivers edge-device , edge_lighting , edge_pocketsocket	1411	49274	October 30, 2025

Include Fibaro Motion Sensor with Edge drive fails

Related topics