Z-Wave Device Firmware Update Requests

Developer Programs
#1

Hello everyone!

Beginning with Hub Firmware Beta 0.34.x, we’re beta testing device firmware updates over the Z-Wave network, and we want to know which devices you’d like to see supported in future releases.

Feel free to chime in on this thread with requests, and we’ll update this post as the list of supported devices grows.

Supported Devices

Device Device Firmware Version Hub Targets Available with Hub Firmware Version
Inovelli Ilumin RGBW Smart Bulb (LZW42) 2.30 Samsung SmartThings Hub 2015 (Hub v2)
Samsung SmartThings Hub 2018 (Hub v3)		 0.34.x
4 Likes
Hub Firmware Beta 0.34.x
Old pull wire Ceiling Fan Controller
#2

should we stick to only WWST and CST z-wave devices or any z-wave device?

#3

Inovelli LZW31-SN!

2 Likes
#4

Anything from @TheSmartestHouse would be fantastic!

4 Likes
#5

Fibaro single switch 2 and fibaro double switch 2. Aeotec devices and danalock.

2 Likes
#6

Somfy / Springs Window Fashions / Bali / Graeber ZWave blind / shade motors.

1 Like
#7

Leviton z wave in-wall dimmers and switches.
In particular: the R52-DZ6HD
@jamesdvb

3 Likes
#8

Popp electric strike lock, fibaro rgbw and fibaro door sensor 2

#9

Inovelli LZW31-SN
Zooz ZSE40
Zooz ZEN21
Zooz ZEN22

3 Likes
#10

Schlage Connect and all Jasco Products (Dimmers/Switches/Outlets).

1 Like
#11

All Honeywell products - specifically Honeywell Home Honeywell UltraPro Z-Wave Plus Smart Receptacle 39349.

#12

+1
Both DZ6HD (dimmer) and DZ15S (switch).

Also Kwikset locks (specifically interested in 910, 912, and 916).

#13
  • HeatIt Z-TRM2fx Z-Wave thermostats (the OTA firmware file is available on their website)
  • Securify Peanut plug (this is ZigBee, let me know where I can upload the firmware file)
2 Likes
#14

Literally all of the Aeotec/AEON firmware for past and present devices that are all listed on their support pages:

4 Likes
#15

Zooz ZEN27 dimmers and ZEN26 switches

1 Like
#16

Ring z-wave sensors

#17

Iblinds zwave blinds module

1 Like
#18

All Zooz switches
All GE Enbrighten switches

5 Likes
#19

Chris, another firmware received from the manufacturer: Heatit Z-Push Button (2, 4 and 8) (zwave)
Let me know if there’s a place to upload them or send them in.

#20

What’s the latest fw version for the heatit buttons?

© 2020 SmartThings, Inc. All Rights Reserved.