I recently purchased a Smartthings 2.0 Hub after becoming exasperated with my previous controllers (Almond+ & Wink). However, so far I am even more frustrated, especially after doing so much research prior to deciding to go with STH 2.0. Every website stated that the STH 2.0 was the best. However…

Have you excluded them from your previous controller before you tried to connect them? [image] Deleting device from previous controller Devices & Integrations As I am transitioning from a Homeseer-Z-Troller-based system to Smartthings, I realized that none of the Intermat…

pizzinini, Yes I did delete all connected devices from my Almond+ first. Do I need to do something with the switches themselves too? I did pull the air gaps for a while, which has been suggested in the past as a way of making sure the switches themselves are reset.

Did you “delete” them or “exclude” them. Delete may just hide them but not reset the z-wave connection in the device (Sorry, I don’t have a Almond or Vera so I don’t know how exclude works there). I noticed in the past though when moving devices from one hub to another that I sometimes had to re-con…

Well, that is great to hear that they actually are supported. I am running out of “tech geek points” with my wife with this whole Home Automation thing I have gotten in to this year. She loves our Amazon Echo, which is one of the reason I got the STH 2.0. My Almond+ does not integrate with the Ec…

[image] jnowland: Schlage RP200RNX I think the answer is yes. I think your switch devices are remembering the old hub, so they won’t join/include a new hub until they are reset. The procedure to reset any device can vary from manufacturer to manufacturer so you want printed instructions. I…

I have the same switches throughout my house and I just finished migrating them over from a VeraLite setup. You need to do general device exclusion if they refuse to pair with your new hub. Also, it really is much easier if you put your hub on a super long ethernet cable to do all of this instead of…

Found this: http://blog.securifi.com/removing-z-wave-sensorsdevices-from-your-almond

Thank you all for your support! I can’t wait to get home to try again to connect everything. Very much appreciated y’all! I will post my result.

Y’all are the best! I went home and after taking the dog out… I immediately got to work connecting all of my devices. Using my Almond+, I “removed” each and every device. The link you sent me pizinini was the key. I would never have thought that “removing all devices” would not be the same as r…

One last thing… does the STH 2.0 allow for creating groups? I have 3 GE bulbs in a lamp that I want to turn on together. My old Wink allowed me to make a group out of the 3 bulbs.

Trouble Connecting Switches with 2.0 Hub

Devices & Integrations Connected Things

pizzinini (Pizzinini) September 24, 2015, 2:43pm 2

Have you excluded them from your previous controller before you tried to connect them?

Topic		Replies	Views
Moved to new home: setting up smartThings hub again Connected Things	20	1408	March 7, 2021
Hub v2 Unboxing and Install Connected Things	19	4829	September 30, 2015
Serious n00b who just bought a house full of smart devices in need of guidance Projects & Stories	15	2120	January 3, 2021
V2 Hub Devices NEVER show up for inclusion Devices & Integrations	27	2849	September 26, 2015
Reset GE Switches Devices & Integrations repair , hubv2 , zwaveexclude	3	5177	April 11, 2017

Trouble Connecting Switches with 2.0 Hub

Related topics