Need help with after groovy options

[jameswi]

Is anyone aware of Edge Drivers for the following:

• RainMachine (old DH: brbeaird : RainMachine)
• 2015 Sony Android TVs [2016+ work with app] (old DH: [steveAbratt : Sony Bravia TV)
• Linear GD00Z Garage Door Opener (old DH: gouldner : RG Linear GD00Z Garage Door Opener - V2)
• Tank Utility Propane Monitor (old DH: joshs85 : Tank Utility)
• Hunter Douglas Duette Shades (old DH: johnvey : Hunter Douglas PowerView Shade)

Thanks!

[jkp]

@jameswi

Linear GD00Z Garage Door Opener (old DH: gouldner : RG Linear GD00Z Garage Door Opener - V2)

see if it is available with the stock Edge Drivers.

SmartThingsEdgeDrivers/drivers/SmartThings at main ·...

go to zwave-garage-door-opener and tap on fingerprints to see if it is supported.

then subscribe to the SmartThings Edge Driver Beta if you haven’t already and select the Driver

[jkp]

@jameswi

Hunter Douglas Duette Shades (old DH: johnvey : Hunter Douglas PowerView Shade)

Restore from Backup

You could check if your shades work with the edge driver

[jkp]

@jameswi

RainMachine (old DH: brbeaird : RainMachine)

[RELEASE] RainMachine

Yes, it’s on my list. I’ve been thinking about it for awhile. It should actually be a bit simpler than MyQ since I can have the Edge driver communicate with the RM unit directly via LAN - no need for a separate bridge server.

@jameswi

2015 Sony Android TVs [2016+ work with app] (old DH: [steveAbratt : Sony Bravia TV)

ask in the following thread if they can support yours:

[ST Edge] Sony Bravia TVs

This is a driver for Sony Bravia TVs that supports: Power Volume/Mute Input selection Channel Launching apps (the “Pick a favorite” option) Various remote control commands Picture mute The interface is not as polished as I would like it, but can hopefully be improved in a later version if the UI for the TV capability is finished. Also, the platform currently presents list items in random order, so the menu for remote control commands is a bit tough to navigate. The driver uses UPnP for discovery, and then uses Simple IP Control for most functions. Installed apps are queried and launched using the REST API. My understanding is that Simple IP Control has been around for a while, so older TV models might function with the driver with the exception of launching apps. [Screenshot_20220315…

another thread if you want to ask for help:

Post Requests for Edge Drivers Here (community-created)

First things first: begin by reading the very helpful note from @philh30 below in post#3. Edge is still in beta, and chances are you don’t really need an edge driver right now unless you just want to play around with the technology. If you do want one, there is a list of existing custom edge drivers in the community – created wiki, so check there first to see if there’s already a driver for the device you need. https://thingsthataresmart.wiki/index.php?title=Quick_Browse_Lists_for_Edge_Drivers#Quick_Browse_Links_for_Edge_Drivers If you can’t find one on the quick browse lists, please help save the time of the community developers who are working very hard on these by first reading this whole thread to see if someone has already requested the model you were looking for. I know it seems l…

[Bry (Bryan)]

@jameswi

Linear GD00Z Garage Door Opener

There is a stock Edge driver. My 2 openers auto-converted to the native Z-wave Garage Door Opener Edge Driver.

[rcbjr2 (Richard Belthoff)]

I’m hoping mine converts without an issue. So far I’ve only had one ZigBee switch auto convert.

[wags1]

Most of my Zigbee devices have already migrated. It’s all my zwave in-wall dimmer switches that I’m still waiting on…I sure hope they auto migrate.

[paulmike3 (Not actually Dexter)]

@Bry

There is a stock Edge driver. My 2 openers auto-converted to the native Z-wave Garage Door Opener Edge Driver.

Bought and paired a GD00Z-8 today, and was surprised to find that it paired via S2 with the old stock DTH. Don’t have any custom DTH and never paired one before. Guess I’ll just wait for them to convert it to the edge driver for me.

[csstup (Corey Stup)]

@paulmike3

Bought and paired a GD00Z-8 today, and was surprised to find that it paired via S2 with the old stock DTH. Don’t have any custom DTH and never paired one before. Guess I’ll just wait for them to convert it to the edge driver for me.

Did you have the beta Edge Zwave Garage Door Opener driver installed? It matches the direct fingerprint of the GD00Z-4, but should match other GD00Z models by cluster fingerprint.

[Automated_House (Jimmy aka SmartThingsBeat)]

He shouldn’t need to install the beta driver. The production one has both the linear and generic fingerprints uncommented and live. But I’m not sure the generic fingerprints are working at this point.

SmartThingsCommunity/SmartThingsEdgeDrivers/blob/production/drivers/SmartThings/zwave-garage-door-opener/fingerprints.yml

[JKB121]

My Linear GD00Z’s auto converted and have been “Mostly” Okay since. Since I can’t deal with the random notifications that a door is opening when it actually is not, and usually in the middle of the night. I’m swapping mine out with this ZOOZ ZEN17 UNIVERSAL RELAY – ZOOZ

I posted a while back about the “ghost” opening and it seems others experience it as well. Not able to determine if it is a driver issue or communication issue with the tilt sensor.

Just an option for ya!