I have a schlage connected keypad lever door lock that only has to do two things: Lock at 9:30pm and unlock at 6am. It seems like an impossible task! There are no user codes etc ( other then an emergency code). I tried to set up a lock routine in the classic app and I thought that I did it all co…

Use the Classic app and a couple of tips. Locks are sensitive devices on a zwave mesh. Don’t use a top of the hour e.g. 9:00pm or 9:30pm, use an few minutes offset like 8:58 or 9:33 as the platform is relatively less loaded at these non peak times and cause less timeout issues. Add a buffering dev…

You will have to use the classic app. They changed their design philosophy for security devices in the new app, and you cannot automate unlocking. [image] FAQ: Why can’t I use Geopresence or an Automation to set the alarm state in the new (V3) app? (Updated 1 November 2019–now you …

Thank you. I already changed it to odd times when I was testing it. Good to know than I can leave the new app alone This is how it’s set up now in the classic app. Can only post one pic per post eye roll [image]

This is the second pic. Than I have a similar rule to unlock it [image]

Looks good, you can check if the command was sent to the lock by looking at the Recently tab in the device page on the ST app. If it was sent and it didn’t lock, then check the mesh or look into back up options. If the command wasn’t sent then something else is going on.

Thanks! I looked up the history and it seemed to have locked… but does it check in every hour with the lock to get a status or why does it repeat the command every hour? [image]

Want lock to lock over night - Schlage - automation- routine-schedules

SmartApps & Automations

RBoy (www.rboyapps.com - Making SmartThings Easy!) July 24, 2019, 3:30pm 8

That’s a visual issue with the local execution of the stock DTH where it reports the status even though it hasn’t changed. It’s been explained in more detail here:

Topic		Replies	Views
Scheduling Schlage Connect BE469 Lock? Devices & Integrations	13	4850	January 9, 2018
Smart Lock Automation Fails SmartApps & Automations	3	368	January 11, 2019
How to auto-lock Schlage Connect - now that Groovy smartapps.is gone Devices & Integrations	10	1915	September 5, 2023
Program schedule for enabling lock for certain hours for a schlage smartlock? Automation Ideas	5	5807	April 9, 2019
Using keypad on Schlage lock to activate activities? Automation Ideas schlage	3	1803	May 3, 2018

Want lock to lock over night - Schlage - automation- routine-schedules

Related topics