With the current Beta Edge drivers, the maximum temperature that can be set is limited to 28 degrees, although the thermostats can be manually set to higher temperatures. Could you therefore increase the max. temperature setting, for example to 39 degrees? If thermostats are installed behind panel…

Hello, @SFalk . Can you provide more details about your device and the driver it is using, please? For the device, brand, model. If possible, its fingerprints For the driver it uses, when you enter the device’s details, there’s an option called “Driver” in the menu (three-dot symbol in the upper-r…

Hi, I’m happy to try to provide you with the information you need. The Edge Drivers are the current original Edge Beta Drivers from Smartthings, see attachment. The Zigbee thermostat is the Popp Zigbee thermostat. Here you can set the temperature manually on the device up to a maximum of 35 degre…

Sorry for the delay, @SFalk . I’ll be ordering the devices with the corresponding information I found: Popp - Zigbee thermostat Fingerprints in the ST driver The range set is [4,28] In the DTH, the range is ºC > [4, 35] ; ºF > [39, 95] Danfoss LC13 - Z-Wave Thermostat Fingerprints in the driv…

Hello @nayelyz , I have same problem with Eurotronic Spirit Z-wave TRV, it is detected as dimmer switch…? Anything to do with this problem, how can I have my trv’s working again?

Hi nayelyz, thank you for your quick response. So you update the current Edge drivers for Zigbee and Z-Wave so that the higher temperatures can then be set? and yes, here the temperatures are set in Celsius. The eurotronic spirit trv thermostats were previously used with this DTH driver. …

[image] SFalk: So you update the current Edge drivers for Zigbee and Z-Wave so that the higher temperatures can then be set? I’ll create a report for the engineering team to check, they are creating the Edge drivers based on the original DTHs and the range definition is recent (10 days ago) t…

Hi, @Timppa71 ! [image] Timppa71: it is detected as dimmer switch Is this a Driver or a DTH? This is strange, maybe a generic fingerprint included there is picking it up. It can be identified what controls the device if you enter its details > go to the menu (three-dot symbol in the upper-ri…

Hi @nayelyz , It is using Edge driver because there is “driver” option. Device info is like post #3 by SFalk. How to download Edge driver and upload it to SmartThings, as option #2?

Hi nayelyz, only with one of the last updates of the Zigbee/z-wave Thermostat Edge driver was the maximum adjustable temperature changed to 28 degrees, previously it was 39 degrees. thank you for your support.

[image] Timppa71: How to download Edge driver and upload it to SmartThings, as option #2? You need to: Go to the official GitHub repository here: GitHub - SmartThingsCommunity/SmartThingsEdgeDrivers Select the option “Code” and click on download ZIP. [download_github] Note: Downloading i…

Setting Temperature Z-Wave Thermostat / Zigbee Thermostat Beta Edge Driver

Developer Programs Support

Rui_Rodrigues (Rui Rodrigues) January 6, 2023, 6:55pm 14

@SFalk @Timppa71

You can find it in this thread! Just tried it and works brilliantly including the battery report.

Here is the link for the driver.

Topic		Replies	Views
[Edge] Heatit Controls Official Edge Driver [v2.3.0] Community Created Drivers edge_hvac	249	10197	May 27, 2025
Stelpro KI Zigbee Thermostat using Zigbee Thermostat Edge Driver can’t set temperature to 65F or 67F Devices & Integrations	30	1733	February 20, 2023
Including MultiChannel device always uses DTH not Edge Driver (Heatit) Writing Edge Drivers	47	2766	November 5, 2023
Request to edit a current driver for z-wave thermostat Features & Feedback	0	346	October 16, 2023
Default Z-wave thermostat DTH - change temp by 0.5C and UI modification not working Writing Device Types	8	1469	February 28, 2022

Setting Temperature Z-Wave Thermostat / Zigbee Thermostat Beta Edge Driver

Related topics