[RELEASE] Zen 26 Switch v2.x

doncaruana · July 12, 2019, 1:24am

And here’s the handler for the new Zen26 v2 switch from @TheSmartestHouse. Check out all the new stuff, including all the scene control, via the readme below (a link to the handler source is at the bottom of the readme).

github.com

doncaruana/SmartThings-doncaruana/blob/master/devicetypes/doncaruana/zooz-zen26-switch-v2.src/readme.md

# Zen26 Switch v2.x

This is the latest paddle switch from thesmartesthouse with the new version 2 firmware (and an update to 2.01 firmware).
https://www.thesmartesthouse.com/products/zooz-z-wave-plus-s2-on-off-wall-switch-zen26-with-simple-direct-3-way-4-way

This device has a LOT of new parameters since version 1 and not only has association capability but also uses Central Scene control 
to enable scenes and control of other devices.

There is also a difference in version 2.0 and 2.01 of the firmware. Version 2 only has 2 taps down or 2 taps down 
for scene control. The version 2.01 firmware allows all 10 'taps' for scene control. The taps are as below:
<table>
<tr><td>Button</td><td>Direction</td><td>Presses</td></tr>
<tr><td>1</td><td>Up</td><td>1</td></tr>
<tr><td>2</td><td>Down</td><td>1</td></tr>
<tr><td>3</td><td>Up</td><td>2</td></tr>
<tr><td>4</td><td>Down</td><td>2</td></tr>
<tr><td>5</td><td>Up</td><td>3</td></tr>
<tr><td>6</td><td>Down</td><td>3</td></tr>
<tr><td>7</td><td>Up</td><td>4</td></tr>
<tr><td>8</td><td>Down</td><td>4</td></tr>

This file has been truncated. show original

Update: 12/7/2019 - Updated to fix a really weird issue with scene control not working along with some basic cleanup.

[RELEASE] Zen 26 Switch v2.x

Customers

Developers

Download the SmartThings App