Post Requests for Zwave Edge Drivers Here (community-created)

Hi, would you be able to help me with a driver to please, its a MCO roller shutter switch, i have the info of it in my request post, i have also tried a heap of other drivers which havent worked, any help from you would be great, thanks

Hi @Troy_Boutsa

Install my zwave thing Mc driver to see all device data, fingerptints, endpoints and command class.

Publish device data to see if is possible add it to my driver

Hi, thanks so much for the reply, is this what you mean ?

not sure if this is better but i copy and paste it from the web interface instead of the screenshot ?

DeviceInfo:

Z-Wave Device:
Id: a6142fc2-c56c-4980-8723-dcea6f9118ab
DNI: 0x47
Firmware Ver: nil * Wake Up-Refresh Device
Library Ver: 3
Zw Protocol Ver: nil * Wake Up-Refresh Device
Manufacturer: 0x015F
Product Type: 0xC521
Product ID: 0x5103
End Point & Command Class: [1]: ZWAVEPLUS_INFO, ASSOCIATION, ASSOCIATION_GRP_INFO, VERSION, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, POWERLEVEL, SWITCH_BINARY, SWITCH_MULTILEVEL, CONFIGURATION, SCENE_ACTUATOR_CONF, SCENE_ACTIVATION, NOTIFICATION, METER, BASIC, FIRMWARE_UPDATE_MD

DeviceInfo:

Z-Wave Device:
Id: a6142fc2-c56c-4980-8723-dcea6f9118ab
DNI: 0x47
Firmware Ver: nil * Wake Up-Refresh Device
Library Ver: nil * Wake Up-Refresh Device
Zw Protocol Ver: nil * Wake Up-Refresh Device
Manufacturer: 0x015F
Product Type: 0xC521
Product ID: 0x5103
End Point & Command Class: [1]: ZWAVEPLUS_INFO, ASSOCIATION, ASSOCIATION_GRP_INFO, VERSION, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, POWERLEVEL, SWITCH_BINARY, SWITCH_MULTILEVEL, CONFIGURATION, SCENE_ACTUATOR_CONF, SCENE_ACTIVATION, NOTIFICATION, METER, BASIC, FIRMWARE_UPDATE_MD

1 Like

Try installing this driver version

─────────────────────────────────────────────────── 
 Name         Z-Wave Window Treatment Mc
 Version      2023-10-11T14:53:38.244086664        
───────────────────────────────────────────────────
- id: MCO/015F/C521/5103
    deviceLabel: MCO Windows Treatment
    manufacturerId: 0x015F
    productType: 0xC521
    productId: 0x5103
    deviceProfileName: window-treatment-power

9 posts were split to a new topic: Issues with zwave window mc

Any driver that works with this: manuals-backend.z-wave.info/make.php?lang=en&sku=AD147-6&cert=ZC10-14080010

Also called Nexa AD-147 :slight_smile:

I think that Z-Wave Switch and Child Mc driver supports Nexa Dimmer Switch

More information about driver

I actually tried those but they didnt work, but have finally worked it out and its working great

1 Like

Hi, did you ever figure this out, having exact same issue ?

Hi, Again, have another request of sorts, again any help would be great, have a qubino flush 1d zwave relay, have it in a gate attached to a magnet as a sensor, was working before edge had a groovy driver, the sensor no longer changes, to open or close, just says connected, have scoured the net, havent come up with anything

80938c56-eef9-4d37-806f-1787fec0f2d8

Activity history

TODAY

8:23 PM

DeviceInfo:

Z-Wave Device:
Id: 80938c56-eef9-4d37-806f-1787fec0f2d8
DNI: 0x3F
Firmware Ver: nil * Wake Up-Refresh Device
Library Ver: 3
Zw Protocol Ver: nil * Wake Up-Refresh Device
Manufacturer: 0x0159
Product Type: 0x0002
Product ID: 0x0053
End Point & Command Class: [1]: ZWAVEPLUS_INFO, VERSION, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, POWERLEVEL, BASIC, SWITCH_ALL, SWITCH_BINARY, SENSOR_BINARY, NOTIFICATION, MULTI_CHANNEL, ASSOCIATION, MULTI_CHANNEL_ASSOCIATION, ASSOCIATION_GRP_INFO, CONFIGURATION

DeviceInfo:

Z-Wave Device:
Id: 80938c56-eef9-4d37-806f-1787fec0f2d8
DNI: 0x3F
Firmware Ver: nil * Wake Up-Refresh Device
Library Ver: nil * Wake Up-Refresh Device
Zw Protocol Ver: nil * Wake Up-Refresh Device
Manufacturer: 0x0159
Product Type: 0x0002
Product ID: 0x0053
End Point & Command Class: [1]: ZWAVEPLUS_INFO, VERSION, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, POWERLEVEL, BASIC, SWITCH_ALL, SWITCH_BINARY, SENSOR_BINARY, NOTIFICATION, MULTI_CHANNEL, ASSOCIATION, MULTI_CHANNEL_ASSOCIATION, ASSOCIATION_GRP_INFO, CONFIGURATION

Hi,

What driver are you using?

If it automatically migrated from DTH to that edge controller, then it may not have been configured correctly and you will need to exclude it and pair it again.

On the other hand, I seem to remember other users who used these relays with an input for a contact sensor, I don’t know if that is their case.

Unfortunately smartthings has only migrated the official DTH code that handled a 0-10v input, and is used with the temperature capability optionally.

The open/close sensor input has not been officially migrated, I think because it was used with a custom DTH

Hi, Im using this one, have excluded and readded, do you recommend to use any other driver ?

For quibino devices, my driver is the same as the stock zwave switch, I haven’t modified anything yet because no one asked me to.

I took a quick look at the driver and qubino documentation and saw an inconsistency that could be the cause of your problem.

The driver set association group 2 to the Hub during device configuration.
According to the manual, the Hub should be associated with group 1.

Install this version of my driver Z-Wave Switch and Child Mc and exclude the device and pair it directly with it. It is no use changing the driver as it would not be configured correctly.

───────────────────────────────────────────────────
 Name         Z-Wave Switch and Child Mc
 Version      2023-10-13T11:03:37.18421768
───────────────────────────────────────────────────
  1. Associations
    Use associations for direct communication between the Flush 1D Relay device and other devices within your Z-Wave network without the need to use the primary gateway (hub). Association Groups: Root device:
    • Group 1: Lifeline group (reserved for communication with the primary gateway (hub)), 1 node allowed.
    • Group 2: Basic on/off (status change report for Q1 load), up to 16 nodes.
    • Group 3: Basic on/off (status change report for I2 input) up to 16 nodes.
    • Group 4: Binary sensor (status change report for I2 input) up to 16 nodes.
    • Group 5: Notification report (status change report for I2 input) up to 16 nodes.
    • Group 6: Multilevel sensor report (external temperature sensor report – sensor sold separately), up to 16 nodes.
    End point 1 (Wall Switch I1):
    • Group 1: Lifeline group, 0 nodes allowed.
    • Group 2: Basic on/off (status change report for Q1 load), up to 16 nodes.

@Troy_Boutsa Please, tell my if works or not when you try it

In a SmartThings setup, the hub may need to be added to both or state changes may not show up in the SmartThings app. But if that’s an issue it will show up right away. :thinking:

1 Like

Normally assigned lifeline association group is enough for the device to report all states.
Group 2 in this case will only report the changes made manually on physical switch 1 to all associated devices and will not respond to the get commands sent by the hub.

This device also needs the association of group 2, endpoint 3 with the hub, in case it is activated to connect an external temperature probe and this is done correctly by the driver for qubino devices that have this input.

The only doubt I have is that smartthings uses the multichannel association command class to associate with the hub and the manual does not say whether cc multichannel association or cc association should be used.

3 Likes

Does anyone know of an Edge-driver for Neo Coolcam NAS-RP01? It’s a pretty nifty range extender for z-wave with built in temp/hum sensors!

Hi @Troy_Boutsa

Are you tested the new driver version?

1 Like

2 posts were split to a new topic: Issues with MC zwave window treatment driver

Hi Mariano,

Can you help me to also add the Simon 100 dimmer iO to one of your edge drivers?
I bought 4 more dimmers and had a electrician install them, and strange thing was that two came in as “energy meter” edge driver, and two as “Dimmer” edge driver (!).
See below a screenshot from using the Z-wave mc thing.
Best regards/Johan

Here is a link to the product
https://www.simonelectric.com/intl/10002020-230-io-rocker-for-dimmer-switch-matt-white-simon-100.html