Post Requests for Zwave Edge Drivers Here (community-created)

[blueyetisoftware]

Do you know the fingerprint? Seems like someone could add it to the zwave smoke implementation in the driver code?

SmartThingsEdgeDrivers/drivers/SmartThings/zwave-smoke-alarm at main ·...

[Mariano_Colmenarejo]

@Automated_House

Is there an Edge driver for the Ecolink Firefighter that has smoke, CO and battery capabilities?

Hi @Automated_House

Here is the Edge driver Zwave sirena Mc, tested by @Terri_Baker and @Jason_Meudt

(NEW RELEASE) Edge Drive Beta Z-Wave Siren Mc Modified for Ecolink Firefighter

(NEW RELEASE) Edge Drive Beta Z-Wave Siren Mc Modified for Ecolink Firefighter Modified stock beta edge driver Z-Wave Siren for Ecolink Firefighter, fingerprint mfr:“014A”, prod:“0005”, model:“000F” Added new profile with smokeDetector and carbonMonoxideDetector capabilities with SmokeDetector categories and icon so that it is correctly detected by STHM. Modified the zwave-sound-sensor / init.lua subdriver in order to detect and emit: Smoke Detected and sound when smoke alarm is detected CO Detected and sound when CO alarm is detected Smoke Detected, CO Detected and sound when smoke and CO alarms are detected Tested by @Terri_Baker, thanks This is the version of the modified driver: ┌─────────────┬──────────────────────────────────────┐ │ Name │ Z-Wave Siren Mc …

[Automated_House (Jimmy aka SmartThingsBeat)]

perfect! Thanks @Mariano_Colmenarejo!

[uncledaveghr (Uncledave)]

Im after an edge driver for a z-wave electric meter
Can anybody help on this one.

Home Energy Meter (2nd Edition) Model: DSB28-ZWEU (868.42MHz) Input: 230VAC, 50Hz, 10mA Aeon Labs

[RobinScavok (Robin)]

Hi,

I am currently migrating my Fibaro Walli Outlets FGWOF-011 from Hubitat to Smartthings. The device is recognized as a metering switch and the primary functions all work great, being switch, power meter and energy consumption. Unfortunately I am unable to set any of the advanced parameters of the Fibaro device. The available parameters are documented here: Walli Outlet - E/F | FIBARO Manuals I am actually only interested in changing parameter 11, as by default the LED ring is very bright and lights up the bedroom at night. Would it be possible to have a custom driver with this capability? Thank you in advance for having a look.

[Mariano_Colmenarejo]

@RobinScavok

Would it be possible to have a custom driver with this capability?

Hi @RobinScavok

I had forgotten that I was going to try to make a driver to configure the parameters of zwave devices.
Let’s see if tomorrow I get on today I have other things to do

UPDATE:
Driver published

(New Release) New Edge Driver Z-Wave Device Config Mc

(New Release) New Edge Driver Z-Wave Device Config Mc This is the initial version of the driver that allows reading and writing configuration parameters in Z-Wave devices. It also shows at the end of the details view the Manufacturer, productType and productId How does it work? Make a driver change to Z-Wave Device Config Mc on the device you want to configure. All values ​​displayed will be 0. Note: If you have automations that affect this device, they may be missing or disabled. Add a virtual device on them so they don’t get lost. Before the update of the android app they remained as an unknown action. Now the device will disappear from the automation and if in actions or conditions there is only this device, the automation is deleted. If there are more devices it will only be …

[NickA]

Has anyone created an Edge driver for the Monoprice HKZW-DWS01 Door/Window Sensor?

Raw Description zw:S type:0701 mfr:0208 prod:0201 model:0008 ver:1.05 zwv:4.34 lib:03 cc:5E,86,72,71,59,85,80,84,73,70,7A,5A

[Terri_Baker (TeBa)]

@Jason_Meudt

The fIrst, and foremost, is a Fully-Kiosk Browser edge driver. Here is the DTH that I am currently using:

I know this has been requested before but just wondering if any one would consider converting the Fully Kiosk Browser DTH in the linked post to Edge (if it’s even possible)?

[mooch91]

I use an older Monoprice Z-wave contact sensor (#10795) tied in to my smoke detectors via a relay (via external contacts). I’d like this sensor to be reflected in Smartthings as a smoke detector.

I also use the same sensor as a water sensor to identify leaks. I’d like this sensor to be reflected in Smartthings as a leak detector.

Are either of these configured as of yet?

Thanks!

[mooch91]

@damohabir

Back in the good old days, many of use were using Monoprice open/close sensors as smoke detectors, moisture, sensors, security system, etc. These open/close sensors had a pair of contacts internally that wires can be attached to, and then used, along with the modified DTH, for other purposes. I use them as moisture sensors, smoke detectors, and security system arm/disarm detection. This is the DTH that was used.

Monoprice-Connected-Smoke-Alarm/monoprice-connected-smoke-alarm.groovy at master · dan06/Monoprice-Connected-Smoke-Alarm · GitHub

Would appreciate Edge drivers for them.

Here is a thread on the discussion:

Monoprice door/window sensor and Smoke Alarm Device Type

@damohabir

Just requested the same. Have you come up with anything yet? Thanks.

[JDRoberts]

I know it’s a long way around the barn, exactly what you don’t want for emergency alerts, but @taustin does have a virtual smoke alarm and a virtual water sensor which can both be actuated (turned on or off) from a regular routine.

So you could have a regular routine where the trigger was your contact sensor and the action was “turning on“ the virtual device which serves as the alert trigger in smartthings home monitor or another automation.

The good news is all of this does run locally, unlike the old groovy custom versions.

So I don’t know if it’s of any interest or not, but it might be a workaround for the time being.

(The topic title is a clickable link)

[ST Edge] vEdge Creator: a virtual device generator for end users

Here is an Edge driver that will enable end-users to create virtual devices that run locally on-hub. UPDATED JULY 2022… Features: Supports the following virtual device types: A/C, air quality, alarm, battery, contact, door, fan, garage door, light, lock, momentary button, motion, panic, presence, refrigerator, shade, smoke, switch, temp/humidity, TV, switchlevel/dimmer, thermostat, video camera, water Create any number of virtual devices Easy and fast to use: No coding or CLI required Enables you to create 100% local automations with virtual devices See how many devices you’ve created of a given type (inventory) Devices include additional controls and features beyond what is available through CLI-created virtual devices Several virtual device types include a switch that mirrors cont…

@damohabir

[montyfert (martin)]

an edge driver for tuya local would be nice

[JDRoberts]

@montyfert

an edge driver for tuya local would be nice

The problem is that Tuya uses a lot of proprietary code, and they use different proprietary clusters for different models. So it all comes back to the model number. There are several edge drivers already for different tuya models. Which devices specifically were you looking for?

And have you tried checking the quick browse lists in the community-created wiki? That’s where you can find the existing edge Drivers for Tuya devices.

https://thingsthataresmart.wiki/index.php?title=How_to_Quick_Browse_the_Community-Created_SmartApps_Forum_Section#Quick_Browse_Links_for_Edge_Drivers

[David_Kneebush]

How about a Edge Driver for Ring Contact and Motion Sensors.

[RobinScavok (Robin)]

Hi @Mariano_Colmenarejo

Thank you very much for de device config driver. It works perfectly! Now I can finish my migration to Smartthings. Hero!

[Alwas]

@Helder_Rodrigues if you use the search function in the forum and search “edge Z-Wave”, you’ll see a list of all the edge drivers for Z-Wave that have been done, this is the easiest and quickest way.

[swdeason (Steve)]

Looking for edge drivers for:
BeSense Open/Closed Sensor

• IM20 Z-Wave
• zw:Ss2 type:0701 mfr:027A prod:0301 model:0012 ver:1.03 zwv:4.61 lib:03 cc:5E,55,98,9F sec:86,85,59,72,5A,73,80,71,30,84,70,6C,7A
• MSR: 0214-0002-0001
• networkSecurityLevel: ZWAVE_LEGACY_NON_SECURE

Homeseer leak sensor
LS100+ Water Sensor

• zw:S type:2001 mfr:000C prod:0201 model:000A ver:1.04 zwv:4.61 lib:03 cc:5E,85,59,55,86,72,5A,73,80,71,84,70,6C,31,30,7A
• networkSecurityLevel: ZWAVE_LEGACY_NON_SECURE

[csstup (Corey Stup)]

@swdeason

Homeseer leak sensor
LS100+ Water Sensor

I have this one on my list to do if no one else already has. I have a working DTH I built for the LS100+ as it has some oddities and errors in the manual vs how the device actually responds/performs. I have a bunch of these sensors in production now.

[swdeason (Steve)]

Thank you. Keep us posted.

Also need Edge driver for:

Zooz Motion Sensor ZSE18

• zw:Ss2 type:0701 mfr:027A prod:0301 model:0012 ver:1.03 zwv:4.61 lib:03 cc:5E,55,98,9F sec:86,85,59,72,5A,73,80,71,30,84,70,6C,7A
• networkSecurityLevel: ZWAVE_S2_UNAUTHENTICATED

Zooz ZEN74 700 Toggle Dimmer

• zw:Ls2a type:1100 mfr:027A prod:7000 model:A004 ver:1.02 zwv:7.13 lib:03 cc:5E,55,9F,6C sec:86,26,70,5B,85,8E,59,72,5A,87,73,7A
• networkSecurityLevel: ZWAVE_S2_AUTHENTICATED

[JDRoberts]

@swdeason

Zooz

Zooz is working on official drivers for all their devices. They haven’t released them yet because they’ve been waiting for Edge itself to stabilize. So I’d expect these to be covered by the time the cutoff actually gets here.