HomeSeer HSM200 Support

Devices & Integrations
98

After reading various things here and on Amazon.com reviews here is how I finally configured this to work with SmartThings hub (version 2 in my case)
Instructions to get EZMultiPli is also known as the HSM200 working with SmartThings Hub version 2

  1. Plug the EZMultiPli is also known as the HSM200 into an outlet. When you do this it should flash green.
  2. On the side of the EZMultiPli (or HSM200) you will see a very small button that is about 1/8 of inch long and a few millimeters thick. Press and hold this for about 30 seconds, it will start flashing colors (I think red) and then it will stop flashing, at this point open your SmartThings app on your iPhone or Android device and click the “Add A Thing” under My Home
  3. You will then see a new thing called “RGBW Light” added to your SmartThings. At this point it is not configured yet.
  4. Go the https://graph.api.smartthings.com and log in
  5. Go to My Device Handlers at the top and click button “Create New Device Handler”
  6. Under “Create New Device Handler” Click on the “From Code” link at the top
  7. Go this this URL https://github.com/drzwave/ExpressControls/blob/master/EZMultiPliDeviceType.gy and copy the code into your clipboard or memory of your PC or Mac
  8. Then Paste the code into the blank white box under the Create New Device Handler in the From Code link
  9. Click the Create button at the bottom
  10. From https://graph.api.smartthings.com/ go to My devices and you should see the RGBW Light Device, click Edit
  11. Click the Type* field and scroll to the very very bottom and you should now see “EZmultiPli” select that
  12. Optionally select Label to something more useful as in “Temperature Outside” (you can do this from the SmartThings app on your phone)
  13. Click Update
  14. Now in the SmartThings app on your phone you will see the temperature, you will have to enter the “thing” and leave it and it will soon show up with the temperature
1 Like