I just bought this (Adurosmart Eria Wireless Dimming Switch Remote) and the model name had changed from Adurolight_NCC to AduroLight_NCC (uppercase L)… So the new Smartthings App would not really show any buttons… So I had to modify the Groovy script three places (Zigbee multi button) to support the new model as well (still supporting previous models also). Creating my own device handler.
Modified groovy script here
/**
* Copyright 2019 SmartThings
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
* Author: SRPOL
* Date: 2019-02-18
*/
import groovy.json.JsonOutput
import physicalgraph.zigbee.zcl.DataType
metadata {
definition (name: "My modified Zigbee Multi Button", namespace: "smartthings", author: "SmartThings", mcdSync: true, ocfDeviceType: "x.com.st.d.remotecontroller") {
capability "Actuator"
capability "Battery"
capability "Button"
capability "Holdable Button"
capability "Configuration"
capability "Refresh"
capability "Sensor"
capability "Health Check"
fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Iris KeyFob
fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L2", deviceJoinName: "Iris Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Iris KeyFob
fingerprint profileId: "0104", inClusters: "0004", outClusters: "0000, 0001, 0003, 0004, 0005, 0B05", manufacturer: "HEIMAN", model: "SceneSwitch-EM-3.0", deviceJoinName: "HEIMAN Remote Control", vid: "generic-4-button" //HEIMAN Scene Keypad
//AduroSmart
fingerprint inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, FCCC, 1000", outClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, FCCC, 1000", manufacturer: "AduroSmart Eria", model: "ADUROLIGHT_CSC", deviceJoinName: "Eria Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Eria scene button switch V2.1
fingerprint inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, FCCC, 1000", outClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, FCCC, 1000", manufacturer: "ADUROLIGHT", model: "ADUROLIGHT_CSC", deviceJoinName: "Eria Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Eria scene button switch V2.0
fingerprint inClusters: "0000, 0003, 0008, FCCC, 1000", outClusters: "0003, 0004, 0006, 0008, FCCC, 1000", manufacturer: "ADUROLIGHT", model: "AduroLight_NCC", deviceJoinName: "Eria Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Eria dimming button switch V2.1 new model name
fingerprint inClusters: "0000, 0003, 0008, FCCC, 1000", outClusters: "0003, 0004, 0006, 0008, FCCC, 1000", manufacturer: "AduroSmart Eria", model: "Adurolight_NCC", deviceJoinName: "Eria Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Eria dimming button switch V2.1
fingerprint inClusters: "0000, 0003, 0008, FCCC, 1000", outClusters: "0003, 0004, 0006, 0008, FCCC, 1000", manufacturer: "ADUROLIGHT", model: "Adurolight_NCC", deviceJoinName: "Eria Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Eria dimming button switch V2.0
}
tiles {
standardTile("button", "device.button", width: 2, height: 2) {
state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
}
valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
state "battery", label:'${currentValue}% battery', unit:""
}
standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
}
main (["button"])
details(["button", "battery", "refresh"])
}
}
def parse(String description) {
def map = zigbee.getEvent(description)
def result = map ? map : parseAttrMessage(description)
if (result.name == "switch") {
result = createEvent(descriptionText: "Wake up event came in", isStateChange: true)
}
log.debug "Description ${description} parsed to ${result}"
return result
}
def parseAttrMessage(description) {
def descMap = zigbee.parseDescriptionAsMap(description)
def map = [:]
if (descMap?.clusterInt == zigbee.POWER_CONFIGURATION_CLUSTER && descMap.commandInt != 0x07 && descMap?.value) {
map = getBatteryPercentageResult(Integer.parseInt(descMap.value, 16))
} else if (isAduroSmartRemote()) {
map = parseAduroSmartButtonMessage(descMap)
} else if (descMap?.clusterInt == zigbee.ONOFF_CLUSTER && descMap.isClusterSpecific) {
map = getButtonEvent(descMap)
} else if (descMap?.clusterInt == 0x0005) {
def buttonNumber
buttonNumber = buttonMap[device.getDataValue("model")][descMap.data[2]]
log.debug "Number is ${buttonNumber}"
def descriptionText = getButtonName() + " ${buttonNumber} was pushed"
sendEventToChild(buttonNumber, createEvent(name: "button", value: "pushed", data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true))
map = createEvent(name: "button", value: "pushed", data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
}
map
}
def getButtonEvent(descMap) {
if (descMap.commandInt == 1) {
getButtonResult("press")
}
else if (descMap.commandInt == 0) {
def button = buttonMap[device.getDataValue("model")][descMap.sourceEndpoint]
getButtonResult("release", button)
}
}
def getButtonResult(buttonState, buttonNumber = 1) {
def event = [:]
if (buttonState == 'release') {
def timeDiff = now() - state.pressTime
if (timeDiff > 10000) {
return event
} else {
buttonState = timeDiff < holdTime ? "pushed" : "held"
def descriptionText = getButtonName() + " ${buttonNumber} was ${buttonState}"
event = createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
sendEventToChild(buttonNumber, event)
return createEvent(descriptionText: descriptionText)
}
} else if (buttonState == 'press') {
state.pressTime = now()
return event
}
}
def sendEventToChild(buttonNumber, event) {
String childDni = "${device.deviceNetworkId}:$buttonNumber"
def child = childDevices.find { it.deviceNetworkId == childDni }
child?.sendEvent(event)
}
def getBatteryPercentageResult(rawValue) {
log.debug 'Battery'
def volts = rawValue / 10
if (volts > 3.0 || volts == 0 || rawValue == 0xFF) {
[:]
} else {
def result = [
name: 'battery'
]
def minVolts = 2.1
def maxVolts = 3.0
def pct = (volts - minVolts) / (maxVolts - minVolts)
result.value = Math.min(100, (int)(pct * 100))
def linkText = getLinkText(device)
result.descriptionText = "${linkText} battery was ${result.value}%"
createEvent(result)
}
}
def refresh() {
return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, batteryVoltage) +
zigbee.readAttribute(zigbee.ONOFF_CLUSTER, switchType)
zigbee.enrollResponse()
}
def ping() {
refresh()
}
def configure() {
def bindings = getModelBindings(device.getDataValue("model"))
def cmds = zigbee.onOffConfig() +
zigbee.configureReporting(zigbee.POWER_CONFIGURATION_CLUSTER, batteryVoltage, DataType.UINT8, 30, 21600, 0x01) +
zigbee.enrollResponse() +
zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, batteryVoltage) + bindings
if (isHeimanButton())
cmds += zigbee.writeAttribute(0x0000, 0x0012, DataType.BOOLEAN, 0x01) +
addHubToGroup(0x000F) + addHubToGroup(0x0010) + addHubToGroup(0x0011) + addHubToGroup(0x0012)
return cmds
}
def installed() {
sendEvent(name: "button", value: "pushed", isStateChange: true, displayed: false)
sendEvent(name: "supportedButtonValues", value: supportedButtonValues.encodeAsJSON(), displayed: false)
initialize()
}
def updated() {
runIn(2, "initialize", [overwrite: true])
}
def initialize() {
def numberOfButtons = modelNumberOfButtons[device.getDataValue("model")]
sendEvent(name: "numberOfButtons", value: numberOfButtons, displayed: false)
sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
if(!childDevices) {
addChildButtons(numberOfButtons)
}
if(childDevices) {
def event
for(def endpoint : 1..device.currentValue("numberOfButtons")) {
event = createEvent(name: "button", value: "pushed", isStateChange: true)
sendEventToChild(endpoint, event)
}
}
}
private addChildButtons(numberOfButtons) {
for(def endpoint : 1..numberOfButtons) {
try {
String childDni = "${device.deviceNetworkId}:$endpoint"
def componentLabel = getButtonName() + "${endpoint}"
if (isAduroSmartRemote()) {
componentLabel = device.displayName + " - ${endpoint}"
}
def child = addChildDevice("Child Button", childDni, device.getHub().getId(), [
completedSetup: true,
label : componentLabel,
isComponent : true,
componentName : "button$endpoint",
componentLabel: "Button $endpoint"
])
child.sendEvent(name: "supportedButtonValues", value: supportedButtonValues.encodeAsJSON(), displayed: false)
} catch(Exception e) {
log.debug "Exception: ${e}"
}
}
}
private getBatteryVoltage() { 0x0020 }
private getSwitchType() { 0x0000 }
private getHoldTime() { 1000 }
private getButtonMap() {[
"3450-L" : [
"01" : 4,
"02" : 3,
"03" : 1,
"04" : 2
],
"3450-L2" : [
"01" : 4,
"02" : 3,
"03" : 1,
"04" : 2
],
"SceneSwitch-EM-3.0" : [
"01" : 1,
"02" : 2,
"03" : 3,
"04" : 4
]
]}
private getSupportedButtonValues() {
def values
if (device.getDataValue("model") == "SceneSwitch-EM-3.0") {
values = ["pushed"]
} else if (isAduroSmartRemote()) {
values = ["pushed"]
} else {
values = ["pushed", "held"]
}
return values
}
private getModelNumberOfButtons() {[
"3450-L" : 4,
"3450-L2" : 4,
"SceneSwitch-EM-3.0" : 4,
"ADUROLIGHT_CSC" : 4,
"AduroLight_NCC" : 4,
"Adurolight_NCC" : 4
]}
private getModelBindings(model) {
def bindings = []
for(def endpoint : 1..modelNumberOfButtons[model]) {
bindings += zigbee.addBinding(zigbee.ONOFF_CLUSTER, ["destEndpoint" : endpoint])
}
if (isAduroSmartRemote()) {
bindings += zigbee.addBinding(zigbee.LEVEL_CONTROL_CLUSTER, ["destEndpoint" : 2]) +
zigbee.addBinding(zigbee.LEVEL_CONTROL_CLUSTER, ["destEndpoint" : 3])
}
bindings
}
private getButtonName() {
def values = device.displayName.endsWith(' 1') ? "${device.displayName[0..-2]}" : "${device.displayName}"
return values
}
private Map parseAduroSmartButtonMessage(Map descMap){
def buttonState = "pushed"
def buttonNumber = 0
if (descMap.clusterInt == ADUROSMART_SPECIFIC_CLUSTER) {
def list2 = descMap.data
buttonNumber = (list2[1] as int) + 1
}
if (buttonNumber != 0) {
def childevent = createEvent(name: "button", value: "pushed", data: [buttonNumber: 1], isStateChange: true)
sendEventToChild(buttonNumber, childevent)
def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
} else {
return [:]
}
}
def isAduroSmartRemote(){
((device.getDataValue("model") == "Adurolight_NCC") || (device.getDataValue("model") == "AduroLight_NCC") || (device.getDataValue("model") == "ADUROLIGHT_CSC"))
}
def getADUROSMART_SPECIFIC_CLUSTER() {0xFCCC}
private getCLUSTER_GROUPS() { 0x0004 }
private List addHubToGroup(Integer groupAddr) {
["st cmd 0x0000 0x01 ${CLUSTER_GROUPS} 0x00 {${zigbee.swapEndianHex(zigbee.convertToHexString(groupAddr,4))} 00}",
"delay 200"]
}
def isHeimanButton(){
device.getDataValue("model") == "SceneSwitch-EM-3.0"
}