[EDGE] Ring Alarm Keypad (2nd Gen) Edge Driver

Devices & Integrations Community Created Drivers
, , , ,
251

Enhanced Z-Wave Keypad Driver - v20240124

  • (New) SmartThings edge driver for the Ring Keypad Gen2 (UK/US) and also Gen1 (US)
  • (New) Direct arming/disarming with Home Monitor
  • (New) Program user codes via Smart Lock Guest Access (SLGA) or Advanced Web UI
  • (New) Use as a custom actions keypad to trigger custom automation for each user code (up to 999 unique codes), separately for locking, unlocking, arm away, arm stay and disarm
  • (New) View programmed user names/codes
  • Other features include:
  1. Works as a keypad lock in SmartThings
  • Set/use 4-10 digit codes
  • Enable/disable keypad
  • Enable/disable auto lock
  • Lock and unlock using user codes
  • Invalid code notifications
  • Direct arming (arm directly with buttons without user code)
  • Assign dedicated or toggle action (disarm/arm stay/arm away) to √ button
  • Detect Main/Battery power
  • Battery level
  • 3 buttons reporting for Police, Fire and Medical emergencies
  • Panic button (press X and √ simultaneously)
  1. Use with Automations
  • Door bell
  • Security mode
  • Lock state
  • User code/name specific actions separately for arming away/arming stay/disarming/locking/unlocking
  • Panic alarm
  • 4 separate emergency buttons (panic, police, fire, medical)
  • Invalid code, lock/unlock action type (remote, keypad) custom actions
  • Battery levels
  • Power source
  • Dimmer
  • Hardware failure notifications
  1. Use as a Tone capability device (beep/chime)
  2. Use as a Siren/Alarm capability device (supported models)
  3. Locate keypad using a beep
  4. Spoken countdown for entry/exit delays
  5. Ability to configure the following parameters:
  • Choose from 5 chime/ring tones to play
  • Pin code length
  • Pin code timeout
  • Auto lock delay
  • Enable/disable direct arming
  • Announcement volume
  • Emergency buttons press duration (seconds)
  • Ambient light sensor sensitivity
  • Enable/disable proximity sensor
  • Backlight dimmer
  • Disable alarms for emergency buttons (to use automations)

IMG_0056
IMG_0056358×244 23.4 KB
IMG_5725
IMG_57251111×794 66.2 KB

IMG_7555
IMG_7555750×1334 51.6 KB
IMG_7559
IMG_7559750×1334 52.1 KB
IMG_7556
IMG_7556750×1334 53.9 KB
IMG_7557
IMG_7557750×1334 55.1 KB
IMG_7562
IMG_7562750×1334 44.6 KB

IMG_5724
IMG_57241170×2532 125 KB
IMG_5719
IMG_57191170×2532 206 KB
IMG_5720
IMG_57201170×2532 163 KB

Please make sure that your device is within 20ft of a buffering device/repeater for best performance and reliability.

NOTES

  • This version of the enhanced driver is only available via the new platform Drivers license (refer to website for details). If you have an active subscription, the new driver will be automatically pushed to your hub within 24 hours
  • See the first post for a full list of available features

Copyright (c) RBOY APPS