(EDGE Driver-Mc) Zigbee switch MC, Zigbee switch power MC, Zigbee multi switch and child MC

[Mariano_Colmenarejo]

@Sediento

I got this:

This device support cluster 0B04 and can measure Active power.

I will add to Zigbbe Swicth Power Mc and try if works

@Sediento
Added to this driver version

Measure Power but does not measure Energy

───────────────────────────────────────────────────
 Name         Zigbee Switch Power Mc
 Version      2023-01-26T23:05:57.311346706        
───────────────────────────────────────────────────
- id: "OSRAM Plug 01"
    deviceLabel: OSRAM_Plug 01
    manufacturer: OSRAM
    model: Plug 01
    deviceProfileName: switch-power-plug

[Sediento]

Thanks @Mariano_Colmenarejo , could this siren be added to your driver?

Indoor siren - Zipato

[Buds_Smart_Home]

Mariano,

May I request that you add the following device fingerprints to the Driver ‘Zigbee Switch Mc’. This is a new power monitoring plug call Smart Plug GEN2, model number 3RSP02028EZ
When paired in the SmartThings App it does not find an edge driver and it connects to the Groovy DTH ‘ZigBee Switch Power’. Here are the fingerprints:

Thank you in advance for your kind assistance.

~ Bud

[Mariano_Colmenarejo]

@Buds_Smart_Home

This is a new power monitoring plug call Smart Plug GEN2, model number 3RSP02028EZ

Hi @Buds_Smart_Home
Added to this driver version

───────────────────────────────────────────────────
 Name         Zigbee Switch Power Mc
 Version      2023-01-26T23:19:46.779926792
───────────────────────────────────────────────────
- id: "Third Reality/3RSP02028BZ"
    deviceLabel: Third Reality Plug
    manufacturer: Third Reality, Inc
    model: 3RSP02028BZ
    deviceProfileName: switch-power-plug

[Buds_Smart_Home]

Excellent! Thank you for the quick turn around Mariano!

[Mariano_Colmenarejo]

@Sediento

could this siren be added to your driver?

Please, pair device with Z-wave Thing Mc to see fingerprints and command class supported

[Sediento]

@Mariano_Colmenarejo I have no idea how to pair with the Z-wave Thing Mc driver, the siren is being added automatically and I don’t have the “driver” menu to select.

[Mariano_Colmenarejo]

@Sediento

the siren is being added automatically and I don’t have the “driver” menu to select.

If Siren is paired with DTH then can check the device data in IDE

[Sediento]

This is the raw description:

zw:Fs2 type:1005 mfr:0131 prod:0003 model:1083 ver:2.18 zwv:6.02 lib:06 cc:5E,9F,55,6C sec:73,86,85,8E,59,72,5A,25,71,87,70,80

According to Zipato this siren allows you to choose the sound level and the type of sound but these options don’t appear in the smartthings app.

[Mariano_Colmenarejo]

@Sediento

According to Zipato this siren allows you to choose the sound level and the type of sound but these options don’t appear in the smartthings app.

Hi @Sediento

This device is in the stock driver and mine has a generic profile, which is used by various devices.

As in Z-wave, each manufacturer uses different parameters to adjust its options, so to add sound and volume adjustments, it would be necessary to create a specific profile for this device and the necessary code to manage the parameter configuration.

For these create the Z-Wave Device Config Mc driver.
By making a change to this driver and the device manual you can configure the sound and volume parameters and then return to the original driver and the settings made will be maintained.

If you have any questions I can help you

(EDGE Driver-Mc): Z-Wave Device Config Mc

(New Release) New Edge Driver Z-Wave Device Config Mc This is the initial version of the driver that allows reading and writing configuration parameters in Z-Wave devices. There is a New Version Aug/18 There is the Association Groups Version Sep/22 Link to new version with Wake_Up command class. Apr-23 Important note: If your device uses the Z-Wave Switch and Child Mc or Z-Wave Sensor and Child Thermostat Mc driver then they already have this driver built in to configure any parameter or association group creating a virtual configurator device and you don’t need to change to this driver: Link to post release Z-Wave Switch and Child Mc and Z-Wave Sensor and Child Thermostat Mc device config built in My Recommendation: The parameters that can be changed with the preferenc…

[Mariano_Colmenarejo]

Hi @Sediento

I have seen the manual and they only have 6 parameters and they are similar to the ones I have already done on another model.

I will create a profile for this mermaid and I will notify you when it is done in the zwave thread

[Sediento]

Thank you, Maestro!

[vasilievflorin (V. Florin)]

Hi,
This is the one:

[Mariano_Colmenarejo]

@Mariano_Colmenarejo

If so, it doesn’t work with my driver.

Maybe @erickv or @ygerlovin can add it to their drivers

Hi @vasilievflorin

it doesn’t work with my driver.

Ask to @erickv or @ygerlovin can add it to their drivers

[Sediento]

@Mariano_Colmenarejo , I’ve noticed the plug is reporting the values of 28000.0 and 400.0 for the power attribute when what I have plugged to it is less than 50 Watts.
Any ideas?

[Trakker2 (kkossev)]

This is a well known bug in OSRAM Plug01 firmware.
Actually, it does not measure power. You can simply ignore these readings.

[Sediento]

Do you know if the ledvance plugs shows current power consumption and total power measurements? If not, which brands/models show both of them?

[Joffrey_Heyraud]

Hi @Mariano_Colmenarejo,
Any chance you can add this little switch to your driver?

Data
endpointld:01
firmwareFullVersion:0000100A
firmwarelmageType:4
firmwareManufacturerCode:4742
manufacturer: SONOFF
model: ZBMINIL2
zigbeeNodeType: SLEEPY END DEVICE
Raw Description
01 0104 0002 01 07 0000 0001 0003 0006 0007 B05 FC57 01 0019

Kind regards.

[Murilo_Lourencao (Murilo Lourenção)]

@Mariano_Colmenarejo
Hello Mariano, is it possible to add this switch to the driver, Zigbee switch Mc?

[JINYONG (KIM)]

@Mariano_Colmenarejo

The driver is requested.