We will begin rolling out Samsung SmartThings Hub firmware version 0.60.12 starting on March 25, 2026. This will be a phased rollout, so that we can keep a close eye on any issues that arise, so your hub may not be updated immediately. Once downloaded, your Hub will briefly go offline as it reboots …

[image] Ray_Hamel: Will this affect all 2025 S90F model TVs? no, this firmware update is for stand-alone hubs only. TVs are not receiving updates at this time. TVs do not connect to the hubs so that should not be related to the remote through the app. Unless ST has made back-end changes on th…

I’ve had firmware 60.12 for over a week now, and thus far it seems promising. Unfortunately just before the update I also changed by zigbee channel to 20, so I’m not certain which of these two changes have increased my thread and zigbee stability, but so far I’ve not had any thread or devices go of…

It sounds like you’ve found your optimized setup.

[image] Ric_M: It sounds like you’ve found your optimized setup. I might be premature in cracking open the champagne just yet. If it’s like this for an another full month that will be the real test.

[image] Declankh: I might be premature in cracking open the champagne just yet. If it’s like this for an another full month that will be the real test. My champagne is back in the fridge :weary_face:. Just to prove me wrong my Ikea Alpstuga air quality monitor has gone offline after 8 days. T…

Not sure when it happened because I’ve been traveling, but my ST Stations have been updated to 60.13. [Clipboard_04-09-2026_01]

Mine have also updated. I was getting worried that they were going let them fall behind and becpme 2nd class hubs.

[image] Paul_Oliver: Mine have also updated. I was getting worried that they were going let them fall behind and becpme 2nd class hubs. No, that would be my ST Wi-Fi hub that hasn’t been updated in years and is still running 52.xx. Hoping my fridge hub will get updated soon and hopefully get…

I just noticed in the app, my ST Station had a new icon next to it. I selected it and on the details page there was a message that a firmware update was available with a button to start the update. (Sorry no screenshots). I clicked it and the ST Station updated to 60.13. I was surprised to see I …

Will there be a timeline or announcement for Appliance Hubs whether stable or beta? Also have Appliance hubs had betas in the past? Also is there a reason that Appliance hubs lag behind the standalone hubs, are they less technically capable in any capacity?

Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/ThingsOne/2018/2015 Model Hub Firmware Release Notes - 0.60.12

Announcements Hub Firmware Release Notes

Itati (SmartThing Developer Support) Split this topic April 6, 2026, 6:11pm 18

2 posts were split to a new topic: Hub V3 not updating firmware (stuck on version 000.052.00021)

Topic		Replies	Views
Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.58.10 Hub Firmware Release Notes hub_firmware_update	58	4766	December 2, 2025
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.56.11 Hub Firmware Release Notes hub_firmware_update	48	4792	April 10, 2025
Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/ThingsOne/2018 Model Hub Firmware Release Notes - 0.59.8 Hub Firmware Release Notes hub_firmware_update	42	4160	February 18, 2026
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.57.14 Hub Firmware Release Notes hub_firmware_update	45	4095	August 31, 2025
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.45.9 Hub Firmware Release Notes hub_firmware_update	70	10646	October 31, 2022

Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/ThingsOne/2018/2015 Model Hub Firmware Release Notes - 0.60.12

Related topics