Trouble adding old Aeon DSC06106-ZWUS device

[h0ckeysk8er (Bruce Pinsky)]

@VirtualWave

Like this?

Z-Wave Metering Switch Device heater

Name	Z-Wave Metering Switch
Label	heater
Type	Z-Wave Metering Switch
Version	Published
Device Network Id	0E
Status	ONLINE

|Last Activity At|2023-02-01 11:02 AM CST|

|Metrics|* Received Messages From Device: 565

• Received Messages From Device (Duplicates): 24
• Messages Transmitted to Device: 87
• Messages Transmitted to Device (Failures): 0
• Updated Time: 2023-02-01 10:12 AM CST|
  |Data|* MSR: 0086-0003-0006|
  |Raw Description|zw:L type:1001 mfr:0086 prod:0003 model:0006 ver:1.43 zwv:2.78 lib:03 cc:25,31,32,27,70,85,72,86 ccOut:82|

Yep. The Z-Wave Switch Edge driver from @philh30 has that device in its fingerprints. Assuming you don’t have a custom DTH driver installed in the IDE, I’d install his driver on your hub and see if that helps.

[ST Edge] Driver for GE/Jasco/Honeywell Z-Wave Switches, Dimmers, Fans, Outlets, and Plug-Ins

This is an Edge driver for GE/Jasco/Honeywell Z-Wave switches, dimmers, fans, outlets, and plug-ins, covering the range of generations from the legacy non-Plus devices to the current Z-Wave Plus devices with central scene support. Depending on the capabilities of the particular model, the driver supports: Setting configuration parameters Adding nodes to association groups 2 (load) and 3 (double tap) Double/triple tap button events Hub is automatically added to association group 3 for models that support double tap but do not support central scene [Screenshot_20211225-124212] The list of fingerprints currently included can be found here. If you have a model that’s not included, let me know and I’ll look into adding it. To install: Use the following link to enroll in the channel and i…