Hi @nayelyz
In case it can help in your report.
I have been looking at the routines in @TAustin Browser+ API in JSON format and I think the error is only in the routines that use a precondition with a Interval condition and multiple conditions with an OR condition.
If the precondition has a condition it is: equal, greater or equal or less than or equal everything works fine.
Here is an example of a routine with a temperature interval precondition combined with two switch conditions = on with AND. Everything works fine Fine.
-
The precondition is distinguished by the value “trigger”: “Never”
-
The trigger conditions have the value “trigger”: “Always”
-
The IF: { AND: [ … ] condition affects the precondition and the two AND conditions.
The precondition has “trigger”: “Never” and therefore never triggers the execution of the Then part until the two conditions that have “trigger”: “Always” are met.
{
"if": {
"and": [
{
"between": {
"value": {
"device": {
"devices": [
"16fa2ff4-00ca-4b65-b1db-5af142511d65"
],
"component": "main",
"capability": "temperatureMeasurement",
"attribute": "temperature",
"trigger": "Never"
},
"type": "device"
},
"start": {
"decimal": 23,
"type": "decimal"
},
"end": {
"decimal": 26,
"type": "decimal"
},
"changesOnly": false
},
"type": "between"
},
{
"equals": {
"left": {
"device": {
"devices": [
"01caa709-9547-4bd2-b833-1aedeaa57d8d"
],
"component": "main",
"capability": "switch",
"attribute": "switch",
"trigger": "Always"
},
"type": "device"
},
"right": {
"string": "on",
"type": "string"
},
"changesOnly": false
},
"type": "equals"
},
{
"equals": {
"left": {
"device": {
"devices": [
"1d33051b-2218-4f82-a81b-911d6a46c9a9"
],
"component": "main",
"capability": "switch",
"attribute": "switch",
"trigger": "Always"
},
"type": "device"
},
"right": {
"string": "on",
"type": "string"
},
"changesOnly": false
},
"type": "equals"
}
],
"type": "and",
"then": [
{
"notification": {
"push": {
"title": "Termostato, Temperatura: 23~26°C",
"message": "Temperature interval 23° to 26°"
},
"type": "push"
},
"type": "notification"
}
],
"sequence": {
"then": "Parallel",
"else": "Parallel"
}
},
"type": "if"
}
Here is an example of a routine with a temperature Interval precondition, combined with two switch conditions = on with OR. It is fired when any of the OR conditions even if the precondition does not meet:
- The IF: { OR: [ … ] condition affects the precondition and the two OR conditions. the precondition has “trigger”: “Never” and therefore does not trigger.
It never triggers the execution of the Then part, but it should prevent any of the conditions that have “trigger”: “Always” from triggering the execution if its interval precondition is not fulfilled. Then part However is triggered because it is all included within the same IF: { OR: [ … ]
{
"if": {
"or": [
{
"between": {
"value": {
"device": {
"devices": [
"16fa2ff4-00ca-4b65-b1db-5af142511d65"
],
"component": "main",
"capability": "temperatureMeasurement",
"attribute": "temperature",
"trigger": "Never"
},
"type": "device"
},
"start": {
"decimal": 23,
"type": "decimal"
},
"end": {
"decimal": 26,
"type": "decimal"
},
"changesOnly": false
},
"type": "between"
},
{
"equals": {
"left": {
"device": {
"devices": [
"01caa709-9547-4bd2-b833-1aedeaa57d8d"
],
"component": "main",
"capability": "switch",
"attribute": "switch",
"trigger": "Always"
},
"type": "device"
},
"right": {
"string": "on",
"type": "string"
},
"changesOnly": false
},
"type": "equals"
},
{
"equals": {
"left": {
"device": {
"devices": [
"1d33051b-2218-4f82-a81b-911d6a46c9a9"
],
"component": "main",
"capability": "switch",
"attribute": "switch",
"trigger": "Always"
},
"type": "device"
},
"right": {
"string": "on",
"type": "string"
},
"changesOnly": false
},
"type": "equals"
}
],
"type": "or",
"then": [
{
"notification": {
"push": {
"title": "Termostato, Temperatura: 23~26°C",
"message": "Temperature interval 23° to 26°"
},
"type": "push"
},
"type": "notification"
}
],
"sequence": {
"then": "Parallel",
"else": "Parallel"
}
},
"type": "if"
}
Here is an example of a routine with precondition with temperature <= at 18ºC, combined with two switch conditions = on with OR. It is triggered only when any of the OR conditions and the precondition of temperature <= 18ºC are fulfilled:
-
The condition IF: { AND: [ … ] affects the precondition of temperature <= 18ºC. The precondition has “trigger”: “Never” and therefore never triggers execution of the Then part.
The IF: { OR: [ … ] condition only affects the switch = on conditions and therefore prevents any of the conditions that have “trigger”: “Always” from firing Then part if it does not meet precondition temperature <= 18ºC, since its relationship with the precondition is an IF: { AND: [ … ]
{
"if": {
"and": [
{
"lessThanOrEquals": {
"left": {
"device": {
"devices": [
"16fa2ff4-00ca-4b65-b1db-5af142511d65"
],
"component": "main",
"capability": "temperatureMeasurement",
"attribute": "temperature",
"trigger": "Never"
},
"type": "device"
},
"right": {
"decimal": 18,
"type": "decimal"
},
"changesOnly": false
},
"type": "lessThanOrEquals"
},
{
"or": [
{
"equals": {
"left": {
"device": {
"devices": [
"01caa709-9547-4bd2-b833-1aedeaa57d8d"
],
"component": "main",
"capability": "switch",
"attribute": "switch",
"trigger": "Always"
},
"type": "device"
},
"right": {
"string": "on",
"type": "string"
},
"changesOnly": false
},
"type": "equals"
},
{
"equals": {
"left": {
"device": {
"devices": [
"1d33051b-2218-4f82-a81b-911d6a46c9a9"
],
"component": "main",
"capability": "switch",
"attribute": "switch",
"trigger": "Always"
},
"type": "device"
},
"right": {
"string": "on",
"type": "string"
},
"changesOnly": false
},
"type": "equals"
}
],
"type": "or"
}
],
"type": "and",
"then": [
{
"notification": {
"push": {
"title": "Termostato, Temperatura: entre 18°C y 22°c",
"message": "Temperature interval 18° to 22°"
},
"type": "push"
},
"type": "notification"
}
],
"sequence": {
"then": "Parallel",
"else": "Parallel"
}
},
"type": "if"
}
So this is how it should be done also for preconditions with intervals of values and combined with other OR conditions to works fine.