[RFI] Garage door controller, request for information

[RndmGlitch (Stephen)]

Currently I am using this:

New smart app to link the virtual/simulated garage door device with two actual devices

Syncs a Simulated garage door device with 2 actual devices, either a tilt or contact sensor and a switch or relay. The simulated device will then control the actual garage door. In addition, the virtual device will sync when the garage door is opened manually, \n It also attempts to double check the door was actually closed in case the beam was crossed. create a virtual device (see elsewhere for instructions) for device type use the simulated garage door. You can also create a modified version for yourself I recommend decreasing the runin time to 1 sec, otherwise it takes 6 secs before the door starts closing or opening when you toggle the simulated device icon. (That is what I did) install this smart app. select your relay /switch, and actual garage door sensor in the app, Also s…

It works pretty good but it requires me to create a new virtual switch for it. If there was something that worked like this, and would interface with the existing relay and sensor that I have without having to create a new virtual device, that would be a plus.

Currently I am using a Linear FS20Z relay and an Ecolink tilt sensor on the door - it seems to work pretty well with those.