I have. I used this to power this which in turns drives two of these. I attached the deadbolts/strikes using a rectangle aluminum profile to the side of the inside panel of my double patio sliding door, one all the way up and one all the way down. Drilled holes into the outside panel for the bolts to go in. The two sliding panels interlock when power is removed, effectively locking both doors at the same time. Modified the Aeon Outlet code to make it a Lock instead of a Switch (reversing on / off in the process, as I wanted the deadbolts to be locked when no power and unlocked under power). Works like a charm. Since both devices are UL listed, I enclosed them into a 3-gang box inside the wall immediately to the right of the outside panel, bought a 2.4A coiled car charger from BestBuy and used the coiled cable to connect the lower deadbolt to the 3-gang box, through the door threshold. The cable then connects to the LED driver, LED driver to the output of the z-wave microswitch, the microswitch hard wired to 110V. Doors now lock automatically at night and when I am away and unlock when I come home, independent of the sliding door’s lock located in the handle.