I bought two of these after verifying they can report energy level when the level changes. I installed it and paired to ST using the ST native device type (Z-Wave Metering Switch) and found it is as dumb as the Iris Outlet. It reports energy level only when you turn the outlet on/off. Wow, real winner out of the box. I see in the nice documentation that came with the outlet that it is configurable for reporting when energy level changes. Does anyone have a device type created for this already? Does any power outlet hardware monitor and report energy changes with a ST device type? I want something that runs local. Is the ST Outlet (plug) and the Aeon Smart Energy Switch (plug) the only things that work this way using ST device types? Frustrated these are so undocumented you can’t figure out easily what works how out of the box. A custom device type does run slower, right? It is kept in the cloud? And if the internet goes down, I cant see the outlet if it has a custom device type? Could I use the ST Outlet device type? How would I reset the Enerwave Outlet to get it to accept the new device type? Would be custom but oh well.

here is my post for a device type for it. [image] Custom device type for enerwave zw15sm switch Devices & Integrations This is my custom device type for the enerwave zw15sm switch. This is a power monitoring switch but also has custom lite when on and lite when off configuration parameters (the std class doesn’t work) and there is no “never lite” option. Anyway here is my custom code… it may support other enverwave switches not sure… there is parameter 1 with values 0 and 1 for the lite when on and lite when off. I used this switch over the ge switch in this case as it is not a dimmer and supports up to 15amps which I need since I am using this on my roof coil. http://mail.lgk.com/myenerwavezw155smswitch.txt git hub [image]

Hi Larry (@Lgkahn) Like the OP I too have a Enerwave ZW15RM and have run into the same issues. I also tried your device type “Enerwave ZW15SM”, but I get an error: [image] Note I have received this error over the course of many, many days, so I do not believe it is an ST/cloud issue per se. As an aside, I can change it successfully to a Aeon Labs Smart Metering Switch! Your thoughts? Thanks in advance Johan

That error is totally different and is due to a previous device type you used. Exclude the device, rea-add it and then change from stock device type.

Enerwave ZW15RM TR Duplex Receptacle - Power Reporting on Power Change Event

Devices & Integrations

Lgkahn (Larry) December 24, 2015, 4:24am 2

here is my post for a device type for it.

Topic		Replies	Views
Enerwave ZW15RM wireless Z-wave in-wall smart meter energy monitor TR Duplex receptacle Connected Things	10	4591	June 26, 2017
Device type for Enerwave ZW15SM wall switch w/power metering Connected Things	3	1272	October 10, 2015
Turn off energy usage readings Devices & Integrations	13	1930	October 16, 2015
Custom device type for enerwave zw15sm switch Devices & Integrations	31	5129	September 25, 2017
ZW15RM-Plus (Enerwave Duplex Outlet w/ Energy Monitoring) Devices & Integrations	1	1206	May 4, 2018

Enerwave ZW15RM TR Duplex Receptacle - Power Reporting on Power Change Event

Related topics