Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Issues - 0.54.14

[Andrew_Bartlett]

@Floksl

Just switched the hub back on. Lets see and wait devices coming back.

Check out this answer to zwave problems

Schlage locks going offline/online

So an update (and my resolution). The SmartThings dev team looked into my hub logs and devices and found that the mesh was essentially losing packets because of some bad routing devices which causing some sleepy devices to be marked offline. They recommended that I rebuild my mesh, identify the routing devices that were causing problems. That’s what I did, identified which routing devices (in my case it was a mains powered switch) was causing problems and rebuilt my mesh. After doing so, it’s fixed my issues and no more devices going offline and coming back online. Some FLiRS and sleepy devices are more susceptible to routing/mesh issues and I know that FE599 is one of those. I would recommend that folks do the same, identify which of your mesh routing devices are problematic (some devic…