We will begin rolling out Samsung SmartThings Hub firmware version 0.58.10 starting on September 22, 2025. This will be a phased rollout, so that we can keep a close eye on any issues that arise, so your hub may not be updated immediately. Once downloaded, your Hub will briefly go offline as it rebo…

[image] How to Change the Thread Network in SmartThings SmartThings now allows manual switching of the Thread network – for a uniform Thread mesh with fewer problems. Estimated reading time: 4 minutes

@nayelyz Yet again I seem to have completely lost control of my Zigbee devices on my primary hub (it is currently about 20:40Z+1 and I’ve dumped the logs though I’ve no idea when it started). Nothing seems to be getting in or out and I have no idea why. Matter devices are working fine at the moment.…

Hi, @orangebucket I see that you don’t have devices offline in your account, so, the restart on the Sonoff ZBMicro devices helped with the situation, right? If they go back unresponsive or offline, please share the following: Hub logs Approximate timestamp Mention which devices you tested to che…

[image] nayelyz: The other issues we’ve been investigating show a “functional: false” I’ve been looking for that but when I have issues the hub is happily sending out Zigbee commands as if nothing is wrong, but nothing is inbound. Before I stopped using hub groups, they would also be reporti…

All or most of my Zigbee devices show as online, and I’m receiving updates from them (temperature, humidity, etc.). However, the devices randomly drop offline and then come back online. When I try to control any of the devices—such as turning a switch on or off or locking/unlocking a door—I just get…

I also cannot control devices that are directly connected to the Station, such as a light switch about 5 feet away or a smart plug located directly underneath it. The app shows that they are directly connected, but I still get the same network error when I try to turn them on or off.

@nayelyz Thank you so much, I am able to control the devices I tried again and everything seems to be working.

Aeotec Smart Home Hub 2 devices will receive a minor update to 58.12 to address some users not having access to all Thread 1.4 features. This version is just for the Aeotec Smart Home Hub 2 and will be fully released by the end of the day.

If you don’t currently see that feature on your hub I would definitely check back on it after you see your hub has updated, as I do suspect it will make it available to you.

Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.58.10 - #60 by nayelyz - Hub Firmware Release Notes

Topic		Replies	Views	Activity
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.56.11 Hub Firmware Release Notes hub_firmware_update	45	4961	April 3, 2025
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.45.9 Hub Firmware Release Notes hub_firmware_update	67	10730	October 28, 2022
Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/ThingsOne/2018/2015 Model Hub Firmware Release Notes - 0.60.12 Hub Firmware Release Notes hub_firmware_update	64	3797	June 12, 2026
58.X Hub V2/V3 Customer Beta Release Notes Hub Firmware Beta	24	1508	August 29, 2025
Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/ThingsOne/2018 Model Hub Firmware Release Notes - 0.59.8 Hub Firmware Release Notes hub_firmware_update	40	4432	January 19, 2026