We will begin rolling out Samsung SmartThings Hub firmware version 0.58.10 starting on September 22, 2025. This will be a phased rollout, so that we can keep a close eye on any issues that arise, so your hub may not be updated immediately. Once downloaded, your Hub will briefly go offline as it rebo…

[image] How to Change the Thread Network in SmartThings SmartThings now allows manual switching of the Thread network – for a uniform Thread mesh with fewer problems. Estimated reading time: 4 minutes

@nayelyz Yet again I seem to have completely lost control of my Zigbee devices on my primary hub (it is currently about 20:40Z+1 and I’ve dumped the logs though I’ve no idea when it started). Nothing seems to be getting in or out and I have no idea why. Matter devices are working fine at the moment.…

Hi, @orangebucket I see that you don’t have devices offline in your account, so, the restart on the Sonoff ZBMicro devices helped with the situation, right? If they go back unresponsive or offline, please share the following: Hub logs Approximate timestamp Mention which devices you tested to che…

[image] nayelyz: The other issues we’ve been investigating show a “functional: false” I’ve been looking for that but when I have issues the hub is happily sending out Zigbee commands as if nothing is wrong, but nothing is inbound. Before I stopped using hub groups, they would also be reporti…

All or most of my Zigbee devices show as online, and I’m receiving updates from them (temperature, humidity, etc.). However, the devices randomly drop offline and then come back online. When I try to control any of the devices—such as turning a switch on or off or locking/unlocking a door—I just get…

I also cannot control devices that are directly connected to the Station, such as a light switch about 5 feet away or a smart plug located directly underneath it. The app shows that they are directly connected, but I still get the same network error when I try to turn them on or off.

@nayelyz Thank you so much, I am able to control the devices I tried again and everything seems to be working.

If you don’t currently see that feature on your hub I would definitely check back on it after you see your hub has updated, as I do suspect it will make it available to you.

Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.58.10

Announcements Hub Firmware Release Notes

SmartThings (SmartThings) October 16, 2025, 6:30pm 51

Aeotec Smart Home Hub 2 devices will receive a minor update to 58.12 to address some users not having access to all Thread 1.4 features. This version is just for the Aeotec Smart Home Hub 2 and will be fully released by the end of the day.

4 Likes

Aeotec Hub 2 - ST Hub Group

NAT64 not available on V4 Hub

Topic		Replies	Views
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.56.11 Hub Firmware Release Notes hub_firmware_update	48	4787	April 10, 2025
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.45.9 Hub Firmware Release Notes hub_firmware_update	70	10642	October 31, 2022
58.X Hub V2/V3 Customer Beta Release Notes Hub Firmware Beta	24	1430	August 29, 2025
Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/ThingsOne/2018 Model Hub Firmware Release Notes - 0.59.8 Hub Firmware Release Notes hub_firmware_update	42	4147	February 18, 2026
Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Hotfix Notes - 0.48.05 Hub Firmware Release Notes hub_firmware_update	48	5561	July 20, 2023

Aeotec Smart Home Hub 2/Aeotec Smart Home Hub/2018/2015 Model Hub Firmware Release Notes - 0.58.10

Related topics