Adding shade to ST without disabling the remote

Devices & Integrations
11
  1. Reset remote. Press and hold the pinhole button at the back for about 15 seconds. Will cycle through green, amber and red and finally no lights
  2. Add shade to ST (Press and hold button on the motor for 3 seconds while ST is searching for zwave devices)
  3. Add remote to ST (Press and hold the pinhole button at the back for 3 seconds while ST is searching for z-wave devices)
  4. Once remote and shade are both added to ST. Press and release the pinhole button on the remote, it will start flashing
  5. Press and hold the button on the shade for 3 seconds

Now both ST and the Remote will work with the shade. Also, on a future note, signature series is usually way over priced (from horror stories we’ve heard of no support etc, we’ve also learned premiums are extremely high on them).