Zooz ZSE40 4-1 Motion Sensor and other Zooz devices (ZSE01, ZSE02)

[krlaframboise (Kevin)]

@GatVlieg

Kevin, do you have a RELEASE page for your ZSE40 DTH? May want to consider it…

I created a release page for it and I also added a setting for max lux that allows you to specify the value that it reports when the device is maxed out at 100%.

[RELEASE] Zooz 4-in-1 Sensor

There’s a driver available for this device on Zooz’s Edge Driver Channel. Most of the information below is for the old Groovy Handler which will stop working soon. This is a device handler for the Zooz 4-in-1 Sensor (ZSE40). Features: The Main Tile can be set to display Motion, Temperature, Relative Humidity, Light %, or Light Lux. The Secondary Status can be set to display Nothing, Motion, Temperature, Relative Humidity, Light %, Light Lux, or all of them. There’s a tile that shows the last time the device woke up and received setting changes. You can force the device to wake up by using a paperclip to push the hidden button on the bottom of the device, but it doesn’t always work so this tile allows you to verify that your changes were actually applied. Supports offset va…