Any recommendations on the best device handler for the ZooZ 4-in-1 sensor? I have been using the Rboy DH, but recently, the battery was reporting low so I switched in new batteries and now it just reports battery level as 1% and none of the sensors are reporting status updates. I have tried using …

The Smartest House shows there are 4 available: [image] Zooz Z-Wave Plus 4-in-1 Sensor ZSE40 Detect, Monitor & Protect PRODUCT HIGHLIGHTS 4 different sensors in 1 smart device: motion, light, temperature, and humidity Customize your sensor with 7 le

I’d report the issue to @RBoy in the release thread, he seems very responsive to bug reports.

That’s correct, if pressing the little tiny pin hole button isn’t causing any sensor to update than the device has probably lost it’s connection with the hub. Try bringing it close to the hub and pressing the pin hole button again. If it still doesn’t update then the best long term option would be e…

I did exclude it and re-add it and it was still reporting 1% battery level with fresh batteries, so I tried doing the reboot hub/z-wave repair and same thing happened. I am doing this with the sensor sitting about 2 feet away from the ST hub. I will try a different device handler to see if that fi…

Are you using rechargeable batteries, it not a handler issue. Check your IDE Live Logging when you press the pin hole button to see if the device is reporting the battery level and if so what it’s reporting.

Had battery issues as well, so I hardwired them and never looked back. https://www.amazon.com/gp/product/B009SNGQXU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B01C38313E/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 [018089d2df7ff2ae712e9160ae4b614ed589cf5070] […

Yep. I am using rechargeables. I had same issue with different DH. I thought if I was using good quality (eneloop) rechargeables, they would functionally be the same, but I guess not. Have ordered some non-rechargeables and will try that out when they show up. I have tried to switch entirely ove…

That is probably your issue. Rechargeables have a low voltage (1.1 to 1.3v) and this device is very sensitive to voltage. Alkalines are great but Lithium 1.5v are the best. They will last about a year and have a very flat stable voltage curve giving you a much better picture of battery life.

See this post for a comparison of battery voltages and capacity by chemistry. [image] [DEPRECATED] Blink Camera Device Handler with Motion Sensor, Live Video Streaming, Integration with SmartThings/SHM, Temperature, Signals and Push Notifications Community Created Device Types …

ZooZ 4-in-1 sensor - which is the best device handler?

Devices & Integrations

RBoy (www.rboyapps.com - Making SmartThings Easy!) September 26, 2017, 12:40pm 10

See this post for a comparison of battery voltages and capacity by chemistry.

Topic		Replies	Views
[OBSOLETE] ZOOZ ZSE40 4-in-1 Sensor Device Handler Community Created Drivers dth_humiditysensor , dth_motionsensor , dth_luxsensor , dth_sensors	123	25153	June 8, 2019
[RELEASE] Enhanced ZooZ 4 in 1 Sensor (ZSE40 v1/v2/v3) Device Handler with Temperature, Humidity, Motion and Luminescence Sensor with Lux Reporting Community Created Drivers dth_humiditysensor , dth_motionsensor , dth_luxsensor , dth_security , rboyapps	222	45223	June 10, 2021
Zooz ZSE40 4-1 Motion Sensor and other Zooz devices (ZSE01, ZSE02) Connected Things dth_motionsensor , dth_security , dth_sensors	219	36065	August 8, 2019
Monoprice multi purpose sensor 15902 and zooz custom device handler Devices & Integrations	3	852	October 11, 2018
[RELEASE] Zooz 4-in-1 Sensor Community Created Drivers dth_humiditysensor , dth_motionsensor , dth_security , dth_sensors	583	44675	January 16, 2023

ZooZ 4-in-1 sensor - which is the best device handler?

Related topics