If this has been explored lots of times I am sorry I am just not finding the answer. I have two GE zwave switches in my living room. The one that connects to the actual light is in a very inconvenient place we’ll call switch A . So I have added another wall switch ( switch B) that I have connect…

Take a look in this thread as I believe it may have the answers you’re looking for. [image] Is there a way to set up a z-wave association between two devices? Apps & Clients There is a 1-2s lag when I try to get one light to turn on another light with the smart lighting a…

There are several different ways to do this, but it is going to depend on the exact model numbers of the switches that you have, because different switches have different features. So the first thing is we need to know the model numbers if you want to take full advantage of the features in the swi…

I have the older 12724 switches and to be clear switch B has no lights on it , it is being used purely to control switch A

[image] Benito65: I have the older 12724 switches and to be clear switch B has no lights on it , it is being used purely to control switch A OK, that model does not support Association, so you can skip the thread that @ogiewon suggested, it won’t apply. https://products.z-wavealliance.org/p…

Thank you for the help had some problems with trendsetter the lights would not turn on so I will try again later. Can anyone tell me of another switch brand i should choose if i want to go the assocaition route. I think that is my preferred route at this point anyway

Nortek makes a popular model which is sold under a number of different brand names, including Linear and GoControl. These can use association. And you can get one of the master for the switch which is controlling the circuit and the auxiliary for the other location. Shop around, particularly at Ho…

[image] JDRoberts: Linear WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch Don’t want another hub but if i am understanding two of the above would work one as the main switch that goes to the light, the second to the auxiliary which only has power and would associate directly with the one co…

Sorry shoulda read better thank you so much for the advice, I think this is the way I want to go

So reading closely, Will the Linear ones work with LED bulbs. It is connected to a can light system with 6 bulbs. The GE Switch works fine so I would think this one would as well thoughts?

No, you don’t get two of the WD500, you get one WD500 and one WT00Z. Put the WD 500 in the master position. This is the one that can control the current to the light fixture. Put the WT00Z in the auxiliary position. It will essentially function as a wireless remote for the WD 500. The WT00Z is no…

Switch to switch ( Big Switch for Dimmers?)

Devices & Integrations Connected Things

ogiewon August 27, 2017, 4:53pm 2

Take a look in this thread as I believe it may have the answers you’re looking for.

Topic		Replies	Views
FAQ: Solution for Linear/GoControl 3-way switches? (WD500Z-1 and WT00Z-1) (Association options) FAQ	39	15631	December 2, 2024
Simple question: Is the minimote still required? Devices & Integrations	32	6363	August 14, 2016
GoControl Accessory Dimmer, Wiring and Other Questions Devices & Integrations	18	1583	February 25, 2019
Linking Linear WT00Z-1 Accessory Switch to WD500Z-1 Dimmer without using association? Automation Ideas	4	2390	October 31, 2016
Linking Two Dimmer Switches Together Devices & Integrations	5	794	February 26, 2023

Switch to switch ( Big Switch for Dimmers?)

Related topics