Since June 24th 2023, I am not able to maintain the driver as I used to because my mother was really interested in automating her house and I think there isn’t any better hub to unexperienced users other than SmartThings, so I gave mine to her. It was ok to me as I have been using another platform…

Consider using the generic mode to calibrate it. Otherwise, you may buy a tuya hub just to configure the settings and then pair the device with ST. Your settings will be kept the same.

[image] w35l3y: Irrigation mode Off = Duration On = Capacity It probably has something to do with “Datapoint Value” Fill it with some value like “5” and try again.

Hi @w35l3y ! Is it possible to add the WZ-M100-Z Zigbee Human Presence Sensor (a 5.8GHZ mmWave sensor) to your collection of “Presence Tuya Devices - Tuya Presence Sensor” driver? Here’s the “fingerprint” and the “Tuya datapoints” (accordingly to https://github.com/Koenkk/zigbee2mqtt/issues/17483 ) …

Currently, I am not adding similar devices anymore. Instead, I am guiding those interested to add by themselves. Or simply use the new device referencing to the similar one.

Hi @W25l3y! Good news, and at the same time i feel a little silly for all this time i had problems with Zigbee Human Presence Sensors for my Home Office: In few words, i was in a lot of troubles trying to use a TZE200_2aaelwxk zigbee sensor… With w35l3y Tuya Presence Sensor - using similar devices…

Hi! [Screenshot_20231126_190251_SmartThings] Within the basic cluster (0x0000), I want to write to attribute 0x1000 which is a enum8-type. Is that possible with this driver? Changing this attribute from 0 to 1, should change mode of device from on/off in endpoint 0x01 cluster 0x0006 to thermosta…

Hi Wesly, Instead, I am guiding those interested to add by themselves. Or simply use the new device referencing to the similar one. Have you written up something that can guide someone to add a new device to your driver? If you have, I would like to have the guide to see if I can review/enhanc…

Yes. By creating a custom_command like so… w35l3y/EdgeDrivers/blob/0f0fc80c1bdba6f1d7a47286b345f3ab838ba17f/personal-tuya-devices/models/TS0001/_TZ3210_dse8ogfy_wip.yaml#L21 group: 1 - id: 1 command: switchStd base: …

Sure, it is mentioned in the first post of the thread. But here is the direct link… //github.com/w35l3y/EdgeDrivers/tree/0f0fc80c1bdba6f1d7a47286b345f3ab838ba17f/personal-tuya-devices There is also a lot of examples.

Wow! I’m so blind. Will dive into that post now. Thanks.

[ST Edge] Personal Tuya Devices - Generic EF00 Device

Devices & Integrations Community Created Drivers

Topic		Replies	Views
(EDGE Driver-Mc): Zigbee Tuya devices with standard clusters Writing Edge Drivers	49	5574	June 25, 2026
Looking for driver MHCOZY Zigbee Temperature & Humidity Controller Community Created Drivers	21	917	August 15, 2025
What is Mariano Shared Beta Driver? Community Created Drivers	125	10543	March 2, 2025
Post Requests for Zigbee Edge Drivers Here (community-created) Community Created Drivers aftergroovy	1541	46076	June 29, 2026
Tuya door sensor driver Devices & Integrations	40	3447	January 26, 2025

[ST Edge] Personal Tuya Devices - Generic EF00 Device

Related topics