Post Requests for Zigbee Edge Drivers Here (community-created)

I tried it, but no change yet. So, maybe it takes some time?

I’ll watch it for a while. Will also try new batteries, when I can find some.

1 Like

Battery reporting can take a couple hours to start working.

1 Like

Thanks, Paul. I’ll quit messing with it for a while, and give it a chance.

Centralite Micro Motion Sensor 3328-G

I recently had trouble onboarding one of these sensors after it was inadvertently unpaired. While I had assumed it would be picked up as a Generic Zigbee Motion Sensor (which is what I believed the old DTH was), it refused to pair with my ST Hubv2.

Maybe it’s just a fingerprinting issue with the existing ST Edge Zigbee driver, but that’s only a guess on my part and @jkp suggested I post a request here.

Edit: Just to correct and add to the info provided, I found this fingerprint for my specific model

fingerprint inClusters: “0000,0001,0003,0020,0402,0500,0B05”, outClusters: “0019”, manufacturer: “CentraLite”, model: “3328-G”, deviceJoinName: “Centralite Motion Sensor” //Centralite Micro Motion Sensor

This information is from the groovy DTH previously in use, which was not (as I said), the generic Zigbee Motion Sensor.

2 Likes

I updated my original post on the Centralite Micro Motion Sensor with additional information, including the specific model number and fingerprint.

1 Like

Hi @uncledaveghr

You’re welcome to try this one

2 Likes

Thanks for the update,

Hi
Thanks for this, just tried it and loaded up first time, this is one of the one button version that i have.

Thanks again.

@uncledaveghr Sorry I do not have support for that in my current custom ikea button drivers. I would find it difficult to add support because I do not own that device so would not know which events the button press emits to capture within the driver.

It looks like there is some discussion of a driver on this thread though New Ikea tradfri Shortcut Button? - #122 by BlackRose67

2 Likes

Thanks for getting back to me, ive got the one button one working on this now.

3 Likes

Hi all,

Has anyone created/found a driver for

IKEA Trådfri Dimmer

  • zigbeeNodeType: SLEEPY_END_DEVICE
  • application: 21
  • endpointId: 01
  • manufacturer: IKEA of Sweden
  • model: TRADFRI wireless dimmer

I think that IKEA Trådfri Dimmer driver is here SmartThingsEdgeDrivers/drivers/SmartThings/zigbee-dimmer-remote at main · SmartThingsCommunity/SmartThingsEdgeDrivers · GitHub

1 Like

Thank you!! I’ll take a look.

Hi @Mariano_Colmenarejo
Another one i can’t seem to find in your zigbee-light-multifunction-v6


Maybe you will add this

It has the Product Number 14153806L and is identified as Tuya TS0504B, with Zigbee Vendor _TZ3210_sroezl0s

Hi @rubberduck72
Added to this driver version as device with color x,y
I the colors does not works fine tell me

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Light Multifunction Mc        │
│ Version     │ 2022-08-31T17:44:29.026851486        │
└─────────────┴──────────────────────────────────────┘
  - id: "_TZ3210_sroezl0s/LIDL"
    deviceLabel: LIDL TS0504B
    manufacturer: _TZ3210_sroezl0s
    model: TS0504B
    deviceProfileName: rgbw-level-colortemp-2700-6500

I have installed this one .
Working for switch and color bulb . After looking at the code I think it support energy meter.

Do you have a link to install the driver?

I have install from my cli

Ok, I will do the same and try it out.

Please add finger prints for the Sonoff S40 Lite Zigbee Plug. It’s currently listed as DTH and there is no DTH on my account.

“deviceManufacturerCode”: “SONOFF”,
“manufacturerName”: “SmartThings”,
“deviceModel”: “S40LITE”,
“presentationId”: “SmartThings-smartthings-ZigBee_Switch”,

Raw Description: 01 0104 0009 01 07 0000 0003 0004 0005 0006 FC57 FCA0 01 0019

1 Like