I won’t be converting the Neo Coolcam Power Plug DTH into an Edge Driver so it will stop working once the Groovy platform is retired, but it probably doesn’t need a custom driver This is a device handler for the Neo Coolcam Power Plug (NAS-WR02ZU / NAS-WR02ZE) Reports Energy, Power, Voltage, and Current Tracks high/low values for Power, Voltage, and Current Supports all configuration parameters [Screenshot_2018-11-29-17-46-08] [Screenshot_2018-11-29-17-46-16] [Screenshot_2018-11-29-17-46-42] [Screenshot_2018-11-29-17-46-51]

[image] Pbathuk: I know that SmartThings are rolling out an hub update… but can’t see why that would stop devices SmartThings isn’t known for its reliability or stable updates… Unplug the hub, remove the batteries, wait about a minute and then plug it back in. Not sure if that will help, but it can’t hurt.

I tried all that… I have a Aeotec Plug… working ok. SOme other qubino devices, ok. The Neo Cool Cam Plugs stopped. Trying to exclude and include again… it will send voltage reports back to the hub and nothing else… the devices wont accept on or off comands but if I click the physical button it reports back to the hub. By re-including the devices all 10 config itens are pending and the plugs wont respond. Tried what you said… disconnect etc… did not work. Very annoying and unreliable.

[image] WGentine: Tried what you said… disconnect etc… did not work. Very annoying and unreliable. You originally said your nano devices weren’t working either so unless they started working again I don’t think the Neo devices are to blame… Is everything working again?

Wasnt me… was someone else. But is working again and i did nothing… smartthings unreliability.

Has anyone had issues with the plugs after being online for 1-2 weeks, they stop responding in SmartThings?

I have a bunch of the older US ones and just bought some more from the same seller on Amazon. The new ones I just received have a diff prod and model although they look identical. The ones I bought in Feb are: zw:L type:1001 mfr:0258 prod:0003 model:0087 ver:3.94 zwv:4.05 lib:03 cc:5E,72,86,85,59,5A,73,70,25,27,71,32,20 role:05 ff:8700 ui:8700 The ones I just bought this week are: zw:Ls type:1001 mfr:0258 prod:0100 model:1027 ver:2.32 zwv:6.02 lib:03 cc:5E,98,9F,55,6C sec:73,86,85,8E,59,72,5A,25,27,32,71,70 role:05 ff:8700 ui:8700 The manual matches what you consider the “New EU” as far as the advanced config, but this is a US model. I kept getting “7 pending items”. I ended up adding the new fingerprint and changing the contains check from “prod:0200” to “model:1027” in order to get it to see it as a “New” model. Since then, everything works correctly.

[image] DonDallas71: The manual matches what you consider the “New EU” as far as the advanced config, but this is a US model. Thanks for letting me know. I just posted a new version of the handler with the updated fingerprint and product check.

[image] DonDallas71: I have a bunch of the older US ones and just bought some more from the same seller on Amazon. The new ones I just received have a diff prod and model although they look identical. The ones I bought in Feb are: zw:L type:1001 mfr:0258 prod:0003 model:0087 ver:3.94 zwv:4.05 lib:03 cc:5E,72,86,85,59,5A,73,70,25,27,71,32,20 role:05 ff:8700 ui:8700 The ones I just bought this week are: zw:Ls type:1001 mfr:0258 prod:0100 model:1027 ver:2.32 zwv:6.02 lib:03 cc:5E,98,9F,55,6C sec:73,86,85,8E,59,72,5A,25,27,32,71,70 role:05 ff:8700 ui:8700 Unfortunately, these new US versions seem to be pretty unstable. I purchased three 3-packs (9 total) of the older US versions that all worked flawlessly. I purchased one 3-pack of the new US version and one of them was stuck ON no matter what the z-wave control said. Re-pairing and factory resetting didn’t help. I could turn it on/off from z-wave but the actual outlet was always providing power. I returned the pack and got a replacement. With the new pack, two of the three will randomly reboot, which turns the attached device off/on every once in a while. Sometimes it happens after a few hours, other times it happens multiple times in a few minutes. This is with something like 8w LED lamps plugged in. Happens even when the outlet is off or nothing is plugged into it. Very annoying, so I will probably be returning this pack as well.

[image] DonDallas71: This is with something like 8w LED lamps plugged in. I know some smart plugs are unreliable if the wattage is below a certain number, but I’m not sure if this device has that problem. I think the minimum requirement for those other devices was somewhere around 15w which is annoying become most LED bulbs are below that…

[OBSOLETE] Neo Coolcam Power Plug

Devices & Integrations Community Created Drivers

Xu_Harrison (Xu Harrison) March 27, 2019, 1:06pm 126

https://www.aliexpress.com/item/-/32825362894.html why not there or there http://bit.ly/2HWk1VH

(EDGE Driver-Mc): Z-Wave Device Config Mc

Problems with Neo Coolcam Zwave Sensor reports

Topic		Replies	Views
[OBSOLETE] Dome On Off Plug (Manufacturer-Approved) Community Created Drivers dth_powermeter , dth_pocketsocket , dth_sensors	24	6046	January 1, 2023
Xiaomi Mi Smart Plug (New Model) Device Handler Devices & Integrations	57	7433	July 1, 2022
[RELEASE] Zooz Power Switch / Zooz Smart Plug Community Created Drivers dth_powermeter , dth_sensors , dth_outlet	358	23190	December 18, 2022
[RELEASE] Zooz Double Plug Community Created Drivers dth_powermeter , dth_pocketsocket , dth_outlet	133	10522	October 27, 2022
[OBSOLETE] Neo Coolcam Motion Sensor (NAS-PD01ZU-T) Community Created Drivers dth_motionsensor , dth_luxsensor , dth_temperature	88	8045	April 7, 2024

[OBSOLETE] Neo Coolcam Power Plug

Related topics