Continuing the discussion from Aeon HEM v1/v2 Firmware 3.64 Numbers are Off? : Spawned this topic off of the thread listed above to discuss DH topics not related to the firmware discussions.

Hey @greg and @joelw135 , I have something I’d like for you guys to try. I got Simple Event Logger to work by making a couple tweaks to the DH you’re using: [image] Depending on which DH of mine you’re using, please change just 3 lines of code: Look for the section of code titled “def zwaveEven…

Modified my version with no Battery just saw my first log to power Should I be seeing anything in live logging on the IDE? Do you have a Device Handler for the HEM V1 with reading each line separately? . [image]

@johnconstantelo I’ve ordered a HEM v1 and doing some research to understand and get things setup before it gets here. I’m currently using Google Sheets Logging for other devices. Will this provide adequate data when used with your DTH? If anyone is using Google sheets logging, Inside the smarta…

@johnconstantelo Have you modified your HEM V! code to use two separate clamps to have reading for lets say a washer and a dryer? I have another HEM V1 coming today and love your DH, it looks great and has all the info, and better yet it works. Nagging question: What voltage do I set the Device Ha…

[image] greg: link or PM directions on how to make that chart? @greg - here you go… Google Sheets Charts

@johnconstantelo tried the dual clamp reading separately but doesn’t work for me. Your DH works fine but the one by @omyn doesn’t populate the fields for Clamp 1 and Clamp two. This is the DH I used. https://raw.githubusercontent.com/Omynz/Aeon-HEM-v2/master/Aeon%20HEMv2.groovy if you have a chanc…

[image] BrandonL: I’ve ordered a HEM v1 and doing some research to understand and get things setup before it gets here. I’m currently using Google Sheets Logging for other devices. Will this provide adequate data when used with your DTH? Yes, but after working with @krlaframboise ’s app to s…

[image] joelw135: Should I be seeing anything in live logging on the IDE? I didn’t check Live Log, but I would think so. The mobile app’s Recently tab and the device’s event log will update for sure. [image] joelw135: Do you have a Device Handler for the HEM V1 with reading each line se…

I do see info in the Live logging but shows for Energy 1. Very strange[image]

[OBSOLETE] Aeon HEM v1 DH Discussion (DTH link in post 411)

Devices & Integrations

kevin (Kevin) January 18, 2017, 3:11pm 54

@greg - here you go… Google Sheets Charts

1 Like

Topic		Replies	Views
Troubleshooting Aeon Labs Home Energy Meter v1 Connected Things	237	27482	May 24, 2022
NEW: Aeon Home Energy Monitor v2 Device SmartApps & Automations dth_powermeter	386	52844	December 6, 2019
Aeon Home Energy Meter v1 -- Read Clamps Separately Devices & Integrations	186	21143	November 28, 2018
Aeon HEM v1/v2 Firmware 3.64 Numbers are Off? Devices & Integrations	66	14233	November 7, 2017
[OBSOLETE] Aeotec Home Energy Meter Gen 5 composite DTH Projects & Stories aeotec , dth_powermeter , composite	310	28401	March 24, 2023

[OBSOLETE] Aeon HEM v1 DH Discussion (DTH link in post 411)

Related topics