I need a Edge driver for a GE Zwave metering switch

[joelw135 (Joel W)]

I have a GE Metering switch and power reading just stopped. Is there an Edge Driver that works? Thanks.

[Paul_Oliver (PCO)]

Try this driver

[ST Edge] GE/Jasco Zigbee Switches and Dimmers

This is an Edge driver for GE/Jasco zigbee switches and dimmers. The intended models are the 45856 switch and the 45857 dimmer, as those are the models that I own and can test on. Power and energy monitoring are supported for both (properly scaled regardless of your hub firmware version). The switch has no other configuration options. The dimmer has the following options: Default Dim Level - The default dimming level when the device is turned on (a tap on the physical switch or an ON command from the hub). A value of 0 restores the dimmer to the previous level when the switch was last on. Values from 1-100% will scale based on the minimum and maximum dimming settings. This is the only configurable option that I’ve found that is stored in the device - all other settings are programmatic …