How to install Smartthings Edge Drivers?

The community – created wiki has lists of currently available edge drivers from other community members. Remember that edge itself is still in beta, so all of the edge drivers are in beta, but you could check the sensors list there and see if anybody has one that might work. And then ask if they can add your fingerprint.

1 Like

I will try right now.

1 Like

I wrote but until now noone responded. Have I done right?

Yes. Remember that Edge itself is still in Beta, only a few people in the community are working on Edge drivers, and Tuya-made devices are some of the most difficult. You may just need to be patient until more drivers are available. :thinking:

OK, but i did it properly right? On the right spot and on the right way.

You created your own topic, right? I had suggested instead that you post in one of the existing author threads for a sensor driver to see if your fingerprint could be added to that, but I don’t think it will make that much difference. It’s just if you post in one of the existing threads you know the author will see it.

For example, if it was me, I would’ve tried asking in the following thread:

[Beta] Zigbee Edge Driver compatible with Lidl, Ecosmart, Osram, SmartThings & Others

That doesn’t mean it will be done, but the author may know if there’s a problem with doing it and they can let you know about that.

1 Like

Sorry, I should have answered you earlier.

I can add it to a driver, but I don’t know if it will work or use manufacturer specific clusters.
The clusters that show their fingerprint are not very hopeful, the 0001, power Configuration, for the battery is missing
and 0500 IAS Zone

If you want I add it as a motion sensor with battery and tests


Hello! I only saw it today! Only after these months I understood what an Eadge Driver is! It is a driver to be installed on my hub, locally, which is awesome! I don’t know yet how to create/edit theses drivers. So yes, I would be very thankful of you could create a driver for my motion sensors. It is a rechargeable battery (I’m not sure if it responds your question).

Will you add it?


  • application: 49
  • endpointId: 01
  • manufacturer: _TYST11_i5j6ifxj
  • model: 5j6ifxj
    Raw Description 01 0104 0000 00 02 0000 0003 02 0003 0019

I note to add it in August to the Zigbee motion sensor Mc driver, but as I told you, I don’t know if it will work since the standard cluster used for battery and movement information (0001 and 0500) is not visible in its fingerprints.

1 Like

Do you want me to ask Blitzwolf these information?
If yes, what exactly should be the question?

Added to this driver version
Please, Try it and if not work fine, tell me to remove device from driver

│ Name        │ Zigbee Motion Sensor Mc              │
│ Version     │ 2022-08-05T14:45:20.80752067         │
  - id: "_TYST11_i5j6ifxj/Motion"
    deviceLabel: Motion Sensor
    manufacturer: _TYST11_i5j6ifxj
    model: 5j6ifxj
    deviceProfileName: motion-battery

I’m out of town. I’m heading home tomorrow. I will let you know then.

1 Like

Hello! Just tried! It keep saying “verifying”:

Then when clicking on the device it appears this way:

This is the proof that i selected the proper driver right.

I set up 2 automations (turn on and turn off based on motion detection or absence of a bulb for testing). Nothing happened…

I did it from this Driver library:


Can you install zigbee thing Mc from my channel and make a driver change to see what clusters and endpoints it shows?

1 Like

Here it goes:

Hi @Noe_Bailly

Smartlighting does not seem to discover the necessary clusters and therefore will not work with Smartthings.

1 Like

Thank you for trying!

1 Like

The title of this thread is, “How to install Smartthings Drivers?”, and yet I do not see anything about how to install Edge Drivers from github.

Please post the steps or a link if you have them. Thanks

I figured it out by looking at this page and seeing the invitation link:

The owner of the edge driver channel has to give you the link to join the channel. You just follow the link, pick the drivers you want, and then they will be downloaded to your hub. This can take anywhere from a few minutes to a few hours.

Some authors will post the link in the GitHub documentation, others will tell you to get in touch through a website or email, particularly if it’s a closed channel as opposed to open for anyone.

So it just varies, and it’s up to each author to decide how they want to control channel membership.


That’s just for getting the driver downloaded to your hub. Most of this thread is about what you do next, and the short answer is that when you add a device to your smartthings set up which has a fingerprint that matches that driver, then The device will automatically use that driver. You don’t have to go through any additional install steps like you used to have to go to with groovy DTHs.


During the transition phase while both Groovy and edge drivers are available, if you have a custom Groovy DTH on your account that matches a new device’s fingerprint, that’s what will be used. If you want your system to use an edge driver instead, you have to either remove the Groovy DTH from your account all together, or at least modify it to comment out that particular fingerprint.


If you have more than one driver on your hub for the same device, you can switch from one to the other by going to the device details page in the app, tapping on the three horizontal dots in the upper right corner, and then choosing “driver.” This will show you a list of the drivers already available on your hub for that particular device. Noted it does not show you the list of all possible available drivers, just the ones you’ve already downloaded that match that device.


If you need a list of the channels that you have already subscribed to, go to the device details for your smartthings hub and there should be a list of driver channels there.

1 Like

Thank you for the detailed explanations. Very helpful.

I saw this and it woke me up to the fact that now I really do need to take Edge seriously. I will miss webcore but hopefully the replacement won’t be too bad.

1 Like