I’ve created this new topic for discussions of the Xiaomi Aqara Wall Switch, QBKG03LM, with no neutral wire, in particular my ( @aonghusmor ) DH.

Is the switch in decoupled mode or normal mode? I sit set to wired or unwired? Can you let me see what appears in the logs when you switch it on or off from the app? Make sure both debugging preferences are set to true.

So I went ahead and removed the switch then readded it. It seems to be working fine now. It’s done this in the past where it works for 24 hours then stops responding. Here are the logs. It’s set to wired and not Decoupled. Thanks for your time! c885b00c-b723-4146-abe7-9ab508b365eb 9:57:33 AM: debu…

That looks as I would expect when each switch is switched on and then off. If it is dropping off after 24 hours it may be because the link to the hub is too weak. When you look at the details, as in the example from @Alvintham above, the last Hop RSSI number is an indication of the signal strength…

I’ve placed a ZigBee plug near by to see if that solves the problem. Thanks again!

Hi aonghusmor, Is this correct? (For setting the Debugging preference to ‘True’: [image] Here is my log: ba167926-c106-4069-a7cd-0cc7e77f87df 12:03:12 AM: debug [raw:6B4801FCC080F700413C0328270521010008215A01092100070F23000090000C20006410006510006610019539B2AC9C3B963922AE15459739CCB193439839CFD…

You should have changed the setting within the app. Click the 3 dots at the top right and then “Setings”. Set the last 2 preferences to ‘True’. The log you posted doesn’t look like it came from my device handler. That may be a side effect of what you changed in the code, but I think that is unli…

I deleted the device handler and re-publish + Execute update for Aqara Wall Switch. But for the changing of setting within the app, ‘Settings’ is not available after clicking on the 3 dots. Anyway, you are able to assist with this? (notice my 1 gang and 2 gang switch have the ‘setting’ option) [b…

This looks like it has somehow picked up another device handler, not mine. In the IDE under the ‘device details’, please click ‘edit’ at the bottom and then look at the entry labelled ‘Type’. If that doesn’t say ‘Aqara Wall Switch’, then try changing it from the drop-down menu and then click ‘upd…

Hi Aonghusmor, You solved the issue! Thanks, all my 3 gang switches are working fine! Thanks again Aonghusmor!

Good day I have Aqura switch QBKG25LM 3 gung without nutral… I contacted it to the HUB V. 3 successfully and then added your device habdler from github. The problem is that I got only one gung in my app working fine with left phisical gong, while I should have 3 gung in the app… Would you please …

Device Handler for Aqara 2 Gang Wired Wall Switch no Neutral

Devices & Integrations Community Created Drivers

aonghusmor (Aonghus Mor) March 28, 2022, 9:29am 487

I haven’t tried it on a Mac, but I suggest you look at this documentation and this github page.

Topic		Replies	Views
[OBSOLETE] Device Handler for Aqara Wired Wall Switch Connected Things dth_lighting	353	39945	March 17, 2022
[RELEASE] AQARA zigbee wall switch DTH by WooBooung Community Created Drivers	23	3809	August 29, 2021
[RELEASE] Aqara Double Rocker Wall Switch DTH and Discussion (Updated May 26, 2020) Connected Things	29	5469	August 9, 2022
Xiaomi Aqara Zigbee Switch DTH--help needed Writing Device Types zigbee , switch	113	22394	April 2, 2021
Xiaomi Aqara Light Control Smart Switch work or NOT with ST Connected Things	30	15104	December 7, 2018

Device Handler for Aqara 2 Gang Wired Wall Switch no Neutral

Related topics