Another 3-way Help Request

[HalD (Hal)]

Have a look here

[FAQ] GE 3-Way Wiring

I’ve decided to put this FAQ together to help those with questions about installing GE 3-way switches. Definitions of terms: Line: The hot wire from the breaker (usually black) Neutral: The return wire for circuits (usually white) Load: The wire that will be hot when the circuit is completed to your light (usually black) Traveler: In existing 3-way wiring, this wire toggles hot between two switches. In a smart switch 3-way configuration, a smaller charge is looped through the add-on switch. Some things to know: 3-way wiring for smart switches is different than standard 3 way wiring. You cannot use dumb 3-way switches with most smart switches (You must purchase the matching GE add-on switch to wire with your GE smart master switch). If the line is wired into the light fixture, you …

Looks like you’ve got “light between the switches #2” configuration.

Just an aside: the Zooz ZEN26 switch and ZEN27 dimmer let you smarten a 3-way by only replacing one side. The other side retains the dumb switch and does not need to be required. If you’re doing a dimmer, you don’t gain the ability to dim from both switches, the dumb side remains on/off only. And there are some load limits that need to be watched. But it’s a significant cost savings.