Aeotec Multisensor + Aeotec Mini Relay = painfully slow motion response time

[pizzinini]

I think it’s the motion sensor… I have an Aeon relay triggered by a door sensor and reaction is almost instant, less then 1/4 second.

Also, i suggest you look at this thread:

FAQ: Where to locate motion sensor for fastest response?

[image] I have a downstairs hallway that’s perhaps 12 feet long, with a doorway to a spiral staircase at one end (where the picture is taken from) and a door into the garage on the other end. As you can see in the picture, there’s a jog in the hallway. Not seen here are another doorway about 4 feet to the right of the one by the staircase, a bedroom door to the left at a 45-degree angle (you can just make out a bit of the trim on the corner of the wall, near the top), and a laundry room doorway on the right as you go through the jog. The hallway is dark and I want to automatically turn on the lights when I come off the stairway or enter from the garage. I have an Ecolink motion sensor and I’ve tried placing it in each of the four locations marked with circles. (The two near the top are …