Aeon Home Energy Meter

[Navat604 (R.)]

Didn’t know there is a third clamp option. High chance you won’t get it to work due to the firmware or the DTH. If the firmware is for 3 clamps then you will need a new DTH. Maybe open up the log in IDE and see any log with the 3rd clamp hookup and hopefully you do get something.
Ask the author of this post. Maybe there’s something he could point you to.

Aeon Home Energy Meter v1 -- Read Clamps Separately

01/14/2017 – Status Update #5 This Device Handler no longer works correctly. Multiple members have experienced the same issue with incorrect data being generated into the GUI. However, you may want to look at Omyn’s post where they posted an update to the code with new options and features. Might be worth a look! 01/12/2017 – Status Update #4 Informational Update: For those interested in using this code to monitor 120v line sources instead of 240v, please see post #21. If no changes are made to the code, then the HEM will assume a voltage of 240v for each line. 10/24/2015 – Status Update #3 Layout finalized, code published to github. Currently setup for 240v with ‘HVAC’ on L1 and ‘Dryer’ on L2. Example layout: [image] 10/12/2015 – Status Update #2 With everyone’s help, the baseline…