Adding manual option for smart plug in?

[Keo (Joe)]

I have a smartThings Wall plug with a floor lamp plunged into it. I use luminance and motion to decide whether or not the lamp is needed. The problem I am trying to solve is my wife wants to be able to flip a switch and turn the floor lamp on should she want it brighter in the room. (The smartThings plug is plugged into a switched outlet)
I assume the plug is in a offline state when the switch turns the power off to the outlet. Is there any way to change mode if the plug goes offline and then online again? This way if my wife wants the light to stay on, she can toggle the switch, the app will see that the device went offline and then online again, which will change the mode to “Manual”.

[JDRoberts]

The smart plug needs to be always “on” even when the light isn’t. Otherwise it wouldn’t be able be able to hear the next “on” command from the network. So if anyone turns it off with a dumb switch, it can’t come back on again until the current is restored. A common issue in smart home installations.

I’m not sure exactly which model you have, but most of the plug ins have a button on the front that you can push to manually turn on the controlled device. Not always conveniently placed though.

The other alternative is to provide a separate control button that’s nearby,conveniently placed, and obvious to visitors, etc. see the following topic for some examples:

To be politically correct: “spouses,” not “wives.” My mom is the computer science professor, my dad has no tech skills whatsoever. (Hi, Mom! LOL) Anyway, there is an option for each kid’s room if you want to go to the trouble, and you just want button control inside the room rather than for kids on the go… 1) you get a cheap android tablet, should be under $50. 2) You install a version of SmartTiles or a similar dashboard app and install only the devices that tablet has access to. 3) You wall or desk mount it in kiosk mode inside a frame that doesn’t give them access to anything else. http://www.smarttiles.click/ The following picture is from a similar community created dashboard by florianz. Again you would limit the tiles in each room to the ones that kid is supposed to have o…

The other alternative is to replace the load controlling switch with a smart switch, but that requires wiring.

[bravenel (Bruce)]

Further to what @JDRoberts says, you could use a Minimote (small 4 button remote). One of the buttons on it could turn on the floor lamp irrespective of luminance.

[JDRoberts]

This topic lists most of the buttons and remotes that people have working with ST:

FAQ: Full list of buttons and remotes confirmed to work with SmartThings

I’d like to know which buttons and remotes are currently supported or might be supported in the future. Ideally, I’d like to find something similar to the following: http://www.evolvecontrols.com/devices/control-devices/glass-series Though alternatively just a simple nice-looking button which actually works unlike this Aeon according to Amazon reviews: There is an Aeon Key Fob as well, but it doesn’t seem to be very durable or stylish: What else is available?

[jnolan (Jason Nolan)]

Since the lamp is plugged into switched outlet why not use a zwave switch instead of the smartThings Plug. You could turn the switch on manually or with your automation settings. The smartThings Plug could then be reused somewhere else.

[schettj (John S)]

use a zwave switch instead of the smartThings Plug

This is the high spouse acceptance factor method. Switches act like switches. But the home can also turn stuff on (or off) based on your home automation desires. You can even do nice things like not turn stuff off if a human turned it on (with smart apps, anyway)

I’m up to 12 switches in my house. Likely will do at least 6 more. It’s a cleaner install too.

It’s not rocket science - if you’ve successfully installed a dumb dimmer switch you can do it… as long as your wiring has a neutral to the switch box.

[Keo (Joe)]

Since the lamp is plugged into switched outlet why not use a zwave switch instead of the smartThings Plug. You could turn the switch on manually or with your automation settings. The smartThings Plug could then be reused somewhere else.

I could. I was just trying to use what I already had.

[brianlees (Brian Smith)]

I’m hoping my Flics that I backed will get some ST love when the illusive hub v2 ships. That will get a high approval factor in our house.