Router Relocation Question

[JDRoberts]

It’s best if your hub is at least 3 m from your Wi-Fi router.

Many people have them closer together, and things work OK. So as @marktheknife suggested, you can try it and see how it goes. It won’t always be obvious if there’s a problem, though, as it might just mean that some messages are missed and get re-transmitted. So you could just end up with a slower less responsive network than you would if they were farther apart.

And as he also mentioned, the channels make a great deal of difference, so you might just be lucky as far as having a set up that is the least likely to cause interference.

FAQ: What WiFi Channel is least likely to interfere with SmartThings?

Z wave and wifi don’t interfere with each other, so you don’t have to worry about that. But WiFi can drown out nearby zigbee, particularly boosted Wi-Fi. At my house, we have a Wi-Fi booster. If we plug it in on the north wall in one room, all the smartthings – controlled zigbee devices to the west of it drop off-line. If we just move the Wi-Fi booster to the east wall, all the zigbee devices work fine. So the first step is to make sure that your SmartThings hub is at least 3 m away from your Wi-Fi router or any access point. But sometimes the problem is bigger than that, and your Wi-Fi router is broadcasting on a channel which is just drowning out your zigbee devices. You do have the option to change your Wi-Fi router, typically between channels 1, 6, and 11, so what’s the best Wi-F…

So I personally wouldn’t start out with them that close together, but a lot of people do and if it’s not working well you can always move it again.

FAQ: Networking and Reducing Channel interference between WiFi and Zigbee

Continuing the discussion from [RELEASE] Keenect V1.1.0, pressure protection release: Wanted to start a thread on best practices, tools and general discussion on wifi networking and channel interference… I am using several Android apps to manage my network, but I am no RF engineer so it’s always good to hear from others on how they manage their networks. To get started, here is the diagram I’ve been using to limit the interference in my home… [image] source: http://fosiao.com/content/zigbee-and-wifi-rf-channels Also, another interesting article, is this: