The motion related settings get overridden when the physical dial is set to “T” so make sure move it away from that setting when you finish testing. The settings within ST override the dial setting for everything except “T” so it doesn’t matter what you move it to.
The driver does not support the GEN1 model.
Supports all of the device’s configuration parameters
I only had it attached to my testing box, but the bulb attached to it would come on quickly when I’d entered the room.
The only issue I noticed was that when the off time is set to the minimum value of 8 seconds the light turns off as expected, but triggering motion shortly after doesn’t turn on the light back on even though the motion notification gets sent to the hub.
I’m thinking most people would have it set to 30 seconds or more anyways and it’s possible that issue doesn’t exist when it’s mounted outdoors…
Was anyone able to switch this device into “Z-wave only” mode? (Setting configuration parameter 5 to “0”.)
In my case, PIR activity always turned on the switch, even in this mode. I would really need to switch the device in this mode for my application. I posted about this here, where I also have some links to other forums that discuss this device, just to connect the dots, in case someone needs more information.
@csstup Corey, your work is not in vain! I would love to test your driver. I still have 4 of the original HS-FLS100+ flood sensors and one G2. Feel free to PM me details if you’d like me to test. I’m happy to, especially with news that they might not be building a driver for the non-G2 version. That’s an assumption on my part, so will be interesting to see where it lands.