Continuing the discussion from Suggest a Device : Does anyone know if this panel is/can be supported? Or even something like it. I’m trying to replace my existing alarm panels so if anyone has any suggestions I’m all ears. This is as much for WAF as it is functionality.

I’m not entirely sure what happened with my setup but ST dropped from my z-wave network and I lost control from ST while still having it from the panel and ADC. I just tried again though. I could not get the add hub to network from the z-wave utilities tab to work. I ended up making sure the Qolsys …

Thank you for the follow up. Are you using the original IQ panel or the IQ2? Thank you.

Vecto13 Have you experienced anymore issues since the last time you linked the IQ2 and the SmartThings hub?

Yes still having issues. I can’t get the two devices to stay consistently paired with the IQ2 as the primary and the ST as the secondary controller. It appears to work for a very short amount of time (hours?) then the IQ panel drops my ST hub from the network.

Hi, I just began using ST and would like to link it to my IQ2 panel. Where would I start? Thanks!

Thanks for responding. I currently have 3 separate systems operating in my home: my iq2 panel alarm system my ST app that currently controls lighting in a few rooms. my blue iris video surveillance that monitors the exterior of my home. I was hoping to interegrate as much of my current system, m…

@stizzymack Ah…you’re in my world now - I just integrated them all together (well, almost)! Alarm.com integration with ST is described here You’ll have to use ST IDE and this repo IQ2 - set it up as secondary Z-Wave controller You will have to name all of the devices in IQ2 - names do not trans…

Thanks! I’ll jump into it this evening.

So I was able to integrate my alarm.com http://alarm.com arm and disarm functions through ST per your guidance, but I am not sure how I add my IQ2 as a secondary controller.

Qolsys IQ Panel

Devices & Integrations

PashaF (Pasha) December 7, 2017, 7:18pm 38

You would start by telling what exactly you’d like to do.

It is fairly easy to register IQ2 panel as secondary to ST hub.

Topic		Replies	Views
Smartthings and 2Gig with Alarm.com Devices & Integrations hubv2	31	21680	November 24, 2020
Primary and Secondary Controllers with SmartThings and "other" Connected Things	76	37198	March 26, 2018
ST and Qolsys IQ panel some by side? Devices & Integrations	0	940	February 19, 2017
Switching from Alarm.com Home Automation Projects & Stories project_security	47	35010	December 25, 2017
New ADT/SmartThings alarm panel appears to be a 2GIG GC3 panel, compatible with SmartThings? Devices & Integrations project_security	15	8211	October 8, 2018

Qolsys IQ Panel

Related topics