Problems Setting Autolock with Z-Wave Lock PH Edge Driver

[JohnRichard (John Nadeau)]

I’m away from my computer so won’t be able to run CLI, but can answer some of this based upon prior tests.

@h0ckeysk8er

Does the AutoLock state in the AWA and/or the mobile app update to the correct state when the refresh command is issued from the AWA or the CLI?

@JohnRichard

Summary:

1. The Android App Auto Lock Toggle does NOT work.
2. All OTHER Commands sent from the Android App DO work.
3. Sending AutoLock (and other commands) from SmartThings Advance DOES work.
4. In my case, changes made on SmartThings Advance ARE reflected on the Android App Device Card

The AutoLock state in both the AWA and the Mobile App seems to update more consistently when issuing the Refresh Command from the AWA (i.e. The Mobile Apps seems to error out more with the popup "A network or server error occurred. Try again later.” )

@h0ckeysk8er

Does the AutoLock state in the AWA and/or the mobile app update to the correct state when the AutoLock state is manually changed on the lock itself?

I did try that back on Oct 17th 2023 but no joy in getting the “1 of 8” locks to resolve the AutoLock field. I do understand this is a slightly different issue, but can’t help but to think it’s related.

And as well to be clear, I think my other 7 locks are having the same/similar problem to @Puzzling.

@JohnRichard

Tried “manually” setting Auto Lock parameter from Schlage Keypad (which “did” set Auto Lock on/off as desired at the lock, but did NOT activate the parameter Device Card).