At the request of the community Developers, we will now have three similar request Threads: one for Z wave devices, one for Zigbee devices, and one for LAN devices. Please make sure you are posting your request in the correct thread or the right community developer might not see it. . THIS THREAD…

It is a double switch with power.

[image] tomkaja: MCO 2 gang switch (fingerprint: 015F-4121-5102) Added to this driver version ─────────────────────────────────────────────────── Name Z-Wave Switch and Child Mc Version 2023-08-26T15:03:54.79718963 ─────────────────────────────────────────────────── - id: 015F…

Still looking for help with these Monoprice Wave Plus contact sensors (Model HKZW-DWS01) that continue to go offline… These devices worked perfectly for years until the migration to Edge and now every few weeks I have to exclude/re-include… I’ve seen others with the same issue on this thread but n…

Have you tried adding adjusting the wake-up period. You may need to use @Mariano_Colmenarejo 's “Z-Wave device config Mc” driver to make the change. The following is a link to the manual, which has a brief discussion about the Wake-up inteveral. User%20manual%20for%20door%20window%20sens…

Is there a driver for the WT00Z5-1? I just installed one. It defaulted to generic zwave switch. It’s connected, but smartthings doesn’t seem to detect when the switch is pushed on or off. If I use the app for the switch, it works – the LED goes on and off – and it controls the devices as it was …

Mine is also listed as a zwave switch; they work, but I set them up prior to the edge driver switch. My understanding is that once they’re programmed, the targets are “built into” the switch itself - saved in its memory or whatever. It might take someone coming up with a specific driver.

I’m looking for a Zwave thermostat driver for the Honeywell T6 Pro Thermostat. The capabilities that are missing now from the default Zwave driver are the ability to set a minimum cooling temp, a maximum heating temp, and on/off for the schedule. These abilities were available in Groovy with the @…

Hi Mariano! I have a couple of Z-wave scenario buttons (Master from Simon100. Before Edge, I used the stock DTH “Z-wave button” and it worked fine (I changed it to the Z-wave button manually in the IDE after pair-in). Now its a problem when re-pairing it. Can you help med add a fingerprint from t…

[image] JohanW: Hi Mariano! I have a couple of Z-wave scenario buttons (Master from Simon100. Before Edge, I used the stock DTH “Z-wave button” and it worked fine (I changed it to the Z-wave button manually in the IDE after pair-in). Now its a problem when re-pairing it. Can you help med add …

[image] JDRoberts: The fingerprint consists of two fields: the manufacturer code, and the model code. After adding the device to your smartthings account, you can see these fields in the web interface to your account at my.smartthings.com/advanced The fingerprint is case-sensitive, so most pe…

Post Requests for Zwave Edge Drivers Here (community-created)

Devices & Integrations Community Created Drivers

Topic		Replies	Views
Post Requests for Zigbee Edge Drivers Here (community-created) Community Created Drivers aftergroovy	1532	45176	June 9, 2026
New Stock Edge Drivers Beta list Devices & Integrations edge-device	156	22719	July 24, 2023
Enbrighten switch drivers? Devices & Integrations switch	43	4826	June 4, 2026
Post Requests for LAN/WIFI Edge Drivers Here (community-created) Community Created Drivers aftergroovy	228	11242	May 15, 2026
Preview \| SmartThings-managed Edge Device Drivers Devices & Integrations edge-device	273	65260	December 6, 2023

Post Requests for Zwave Edge Drivers Here (community-created)

Related topics