Table of Contents New Install? Use the Classic app and Modes, then consider moving to the New App 1. Purpose 2. Support This Project - Donate 3. Features 4. Quick Setup Guide 5. Installing the Smartapp 6. Create Simulated Sensor 7. Settings: SHM Classic and STHM New App 8. Settings…

[image] Daniel_Arthur: My keypad was running fine, but then my toddler entered in a string of numbers and hit “off” after he saw me do it and now the keypad doesnt seem to be working I would guess the “network” icon light is now off, meaning the keypad is no longer connected to the hub. Assu…

I pulled the battery last night, and the “light show” stopped. When motion is sensed the “off” light lights up and the “network” icon blinks 2-3 times and then goes off. Still no communication with ST. Any ideas? The keypad it on the other side of a wall from the hub that is in a closest. It has …

[image] Daniel_Arthur: Still no communication with ST. Any ideas? Move the keypad close to the hub, and attempt to arm from the keypad. Should that not work, do the battery pull one more time or replace it if you have spare, then retry arming from the keypad. Should it still not work and yo…

Thank you for your work on this app. I just got the ADT smarthings hub and just set it all up last night. I installed the smart app SHM Delay 2.0. and have a few questions. They may be dumb, I read all forums i could find before posting this question. I have a motion sensor that is pointing to towar…

[image] computerjames: I just got the ADT smarthings hub and just set it all up last night. I installed the smart app SHM Delay 2.0. and have a few questions The ADT hub has built in entry and exit delays and does not require SHM Delay. I suggest posting questions about the ADT hub on the AD…

Ok thank you. I see the exit delay, but on a quick test last night, after arming , I moved and to a motion sensor, it immediately armed. Thank you I will investigate further…

Iris user / Now SmartThings user here, Is this SHM Delay compatible with the “new app”? When using the keypad I can get the classic app to change the alarm (Arm) but when I log in to the “new app” it says disarmed. It’s almost like they aren’t communicating with each other…

[image] SopranoCastle: Is this SHM Delay compatible with the “new app”? No, Classic only.

I’m using Classic and I’m rather happy with it, especially since I’m using Homebridge on a Raspberry Pi to connect the entire system to Homekit. I’m curious, if Samsung were to force us to move to the new app, will you migrate SHM Delay as well or would that be the end of this pretty great period of…

[OBSOLETE] SHM Delay Version 2.0

SmartApps & Automations Community Created SmartApps

arnb (Arn B) February 15, 2019, 2:00pm 867

The ADT hub has built in entry and exit delays and does not require SHM Delay.

I suggest posting questions about the ADT hub on the ADT Hub forum. You may also want to review the ADT tools smartapp

Topic		Replies	Views
[Deprecated as of Apr 8, 2018] Smart Home Monitor Exit and Entry Delays (Version1) Community Created SmartApps	305	41159	October 5, 2018
[OBSOLETE] SHM Delay TrueExit - Create a SmartHome True Exit Delay Community Created SmartApps smartapp_security	52	8175	February 28, 2020
[OBSOLETE] My version of entry and exit delay for SHM (Classic App) Community Created SmartApps smartapp_security	8	1298	March 28, 2019
Smart home monitor exit/enter delay Automation Ideas	81	21586	March 18, 2023
[OBSOLETE] Lowes Iris and XFinity CentraLite keypad DTH + Apps Community Created Drivers dth_security , smartapp_security	819	68145	April 12, 2021

[OBSOLETE] SHM Delay Version 2.0

Related topics