Update: See the Raspberry Pi Device Type & BerryIO post. I’ve created a device type for the Raspberry Pi that utilizes WebIOPi as a REST endpoint for SmartThings to communicate with. As of right now, I’ve only gathered the Raspberry Pi internal sensor readings but the GPIO can easily be added later…

sounds like you made some kind of syntax mistake? { “1M_load”:"<?=$load_average[0]?>", “5M_load”:"<?=$load_average[1]?>", “15M_load”:"<?=$load_average[2]?>", “cpu_temp”:"<?=$temperature?>", “fr_temp”:"<?=$fr_temp?>", “cpu_speed”:"<?=$speed?>", “cpu_volt”:"<?=$voltage?>", “cpu_perc”:"<?=$cpu…

[image] dsmith: www-data ALL=(ALL) NOPASSWD:/proc/stat That line is already there.

oops wrong place. php_admin_value open_basedir “/usr/share/berryio/:/etc/berryio/:/sys/class/gpio/:/sys/devices/virtual/gpio/:/sys/devices/:/proc/” that /proc/ needs to be in /etc/apache2/sites-enabled/berryio.conf then restart apache

David , I am not sure. I thought so at first. But I added a second line to the output to capture two gpio. In the purge the body looks complete but it seems to be anticipating one less item

your rest response is broken somehow, the json is bad. copy/paste the results from the link; go directly to it in a browser; http://ipaddr :port/api_command/smartthings

That did it :slight_smile: Thanks for all your help

David, missing comma with the new line. Thanks. Duh

Where is the smartthings.php file located? I did get my screen to show everything by editing the groovy file and changed the ip address in the preferences section before saving and publishing. I had gpio 17 turned out and on in berryio. The problem i have is i want to control a relay ( to open gar…

[image] Bartos: Where is the smartthings.php file located? On a raspberry Pi it is /usr/share/berryio/includes/views/api/pages

I am really confused here. I cannot seem to get past the Enabling the BerryIO site configuration… ERROR: Site default does not exist! Install failed! Can anyone help me get past this error? I have tried so many things, including changing the berry to have .conf I am using a pi3

[OBSOLETE] Raspberry Pi Device Type

Devices & Integrations Community Created Drivers

cdikland April 8, 2016, 7:46pm 137

That did it Thanks for all your help

1 Like

Topic		Replies	Views
Raspberry Pi Device Type & BerryIO Devices & Integrations devicetype	32	13385	July 19, 2021
[NEEDS UPDATING] Raspberry Pi Relay Controller (WebIOPi) Community Created SmartApps smartapp_misc , requires_server	172	44715	October 3, 2025
Raspberry Pi Monitor Devices & Integrations raspberrypi	93	8412	December 11, 2020
Announcing beta for enabling raspberry pi direct-connected devices Connected Things developers , edge_services	90	8866	July 4, 2023
Raspberry Pi with PHP (or Arduino/ESP8266/NodeMCU) to GPIO to Relay to Gate/Garage Trigger Community Created Drivers devicetype , smartapp , echo , arduino , raspberrypi	376	46216	November 5, 2020

[OBSOLETE] Raspberry Pi Device Type

Related topics