Big Thumbs up to RBoys team. Ive been a Beta use for a couple of months and this is a great tool for Airbnb Hosts.
Takes all the stress out of lock code changes and has lots of notification options. If you are in to Airbnb hosting, take a look.
1 Like
I have the same issue (and yes, I’ve tried refreshing). I only see Lock/Unlock/Audio and Battery Level tiles on my Conexis L1. I want to disable Autolock but none of the advanced features display.
I replied directly to the thread in question and it’s appeared here again so…
Still no answer. As far as I’m concerned, this DH does not support advanced Conexis L1 features. A bit frustrating as this is the only reason I purchased it.
I have not fitted my modules yet but do we even know if these features are supposed via the Z-Wave module. After all it is an addon and may not have the ability to change the actual Locks settings etc. but hopefully it does and we may get a reply soon!
Hope to crack on with setting mine up this coming weekend.
I have a Conexis L1, and this DH gives me an autolock toggle tile.
Hi @RBoy - I have it set up so that SHM goes to “Away” when I use a specific code. However the SHM state is changed to “Armed (Stay)” when I execute. I doubled checked the scenes that are set up correctly. I have it set up correctly in your app. Any ideas?
Make sure you’re on the latest version, sounds like you may be on an older version. If you’re using a “keypad” you need to be on 07.05.00 or newer to use the direct keypad arm/disarm feature.
I’m on version 7.04.06. Sorry by keypad I mean the pad on my Schlage connect.
Hello Sir
I bought a life time subscription and I’d explore the aaps that you developed.
Question here, for Schlage Smartlock (which is currently managed by ST stock z-wave controller), do I have to reset/clear all the entry code before using your advanced smartapp?
I tried to install the app but when I select the user “configure users” section none of the existing user code actually show up (everything listed as blank),
Thank you
Lewis
Hi Lewis,
Resetting the lock is optional, however we do recommend running the Clear Codes procedure listed on it website after installing the app for the first time.
For security reasons locks do not report existing codes so after a new install it will always start with a “clean” slate. Which is also why we recommend running the clear codes procedure (after installing the app) and resetting the lock (before installing the app) so that you know that no “old” are left accidentally.
1 Like
Thank you Maddie
I will reset the lock later then.
Another question is, how can I make sure that the app that I install will use your advanced device handler, not the stock device handler?
Best
Lewis
If you’ve installed the device handler prior to pairing the lock, it will pick it up automatically.
If you’re installing the handler after paring the lock, then you can follow the installation instructions on our website to have to lock use the custom handler.
I updated and all is working perfectly for me. Thank you for following up, the DMs and great product!
1 Like
Proper way to upgrade
Hi Maddie, Yesterday I get the lock working (thank you) and this morning a new release if the “Door Lock Code User Management with Unlock Notifications, Advanced Scheduling and Automatic Lock/Unlock”
Whats the proper way to upgrade with preserving all the old settings? Simply copy and paste the smartapp code over or is there a better way?
Thanks
Lewis
1 Like
That’s it. Just copy, paste and publish. You can find step by step details on our website. It’s detects automatically when it’s upgraded and preserves the settings.
Hi Maddie
I updated the smart app last night from ver 5 to ver 7 and now I can not open the app on my phone to change the codes. The app did load codes to my 2 locks after I updated and the locks are working but I can not open the smart app to edit or change the door codes.
Any suggestions?
I am having problems I can’t use the RBoy custom door lock code user management with LOC notifications smart app. When I downloaded the app and then go to my smart apps it will not open it just sits. When I installed the app the wheel was spinning forever and I had to just close the app and then go back in then the app was sitting there in automation under smart apps when you touch it to open it so that you can use it nothing happens has anyone else experienced this. Suggestions would be greatly appreciated I have thought about re-setting the hub and starting all over but if it is in the cloud that won’t help. When I tried using The smart locks app it records every user as code 99 so that doesn’t help you monitor your lock. And last notify me when app will not work at all it does the same thing as the door lock code user management app it just sits there when you touch it to use it it does not work it doesn’t open so that you can program it.
Not having a good experience over here.
It sounds like your ST account or the ST servers are having an issue. Usually when the server is has load issues you see stuff like this and it goes away after a few hours or when the load drops. If it still doesn’t you should contact ST support to investigate. If nothing else you may need to reset your account or delete all apps/code, exclude and re pair your lock.
For a Yale 226 zwave I see the app can msg me when a certain user unlocks the door. Is there a counter somewhere that logs how many times that user comes in?
Z