[OBSOLETE] Door (Un)Lock Triggers (v2)

[garyd9 (Gary D)]

[quote=“jbrown, post:6, topic:11961”]
Are Schlage Camelot Touchscreen deadbolts supported by your app?
[/quote]To be honest, that’s all I ever used it with. For better (more) functionality, use it with the Schlage custom device type I’ve posted. That will allow triggers based on door lock codes used, if it was manually locked, etc.

(Enhanced) Z-Wave Schlage Touchscreen Lock

UPDATED August 22nd, 2015 (see below) As promised elsewhere, here’s my device type for the Schlage touchscreen door lock/deadbolt. This enables querying and setting the door alarm (off/alert/tamper/kick), door alarm sensitivity, and auto-lock modes. (There’s also support for lock/leave and vacation mode, but I don’t have them on the config panel yet.) One thing about this lock is that it’s a SLOW device in z-wave terms. The turnaround time for sending a command and getting a response can be several seconds. So, if you are using this, you’ll notice that trying to change, for example, the alarm mode, will result in the tile going blank with the word “loading…” in it… and then it populating a few seconds later. When changing the alarm MODE, the alarm sensitivity must be re-queried (a…