Thanks for the reply. Sorry, but after reading back through I realized that I wasn’t super clear.
The plan is to move all of my Z wave and Zigbee devices off of the Staples Connect hub onto the ST hub. That would virtually just leave the Lutron Pico remotes along with a few other random things on the Staples Connect hub. I would then have the Staples Connect hub join ST’s Zwave network as a secondary controller. That would allow any Zwave devices on the ST hub to also show up on the Staples Connect hub.
ST would be where 95% of my actions would be setup and defined. But because the Staples Connect hub would still have the Lutron Pico remotes and could see the ST Zwave network, I could define Activities on the Staples Connect hub for the Lutron Pico remotes that would turn on/off any Zwave related device. Granted, I couldn’t control anything else on the ST hub (i.e. Zigbee), but I could have Hue devices on both hubs and maybe a few other random device types that are not solely controlled by ST. Seems like this would give me some limited functionality between the two environments.