Luton caseta control integration?

[JDRoberts]

They have said several times that it is not on the current roadmap.

Since both Lutron Caseta and SmartThings have an IFTTT channel, you can get indirect integration that way. It’s pretty good for things that are on a time schedule or for the window coverings, but there’s typically too much lag if you want to turn on the switch and have a light come on as someone walks into the room.

Lutron Caséta and RA2 Select Integrations - Connect Your Apps with

There is a community member who has built his own hardware bridge for integration with Lutron RA, some people are looking at it for Lutron RA2 (which is what Lutron Caseta uses) but nothing official.

Lutron RadioRA Integration

My house came with two different lighting systems, about 40 Decora style stand-alone Lutron dimmers, and a Lutron RadioRA lighting system for the main living areas. The stand-alone dimmers were all replaced with Leviton Z-Wave dimmers, and incorporated in SmartThings. The issue remained of what to do with the Lutron RadioRA system. I have created an integration of Lutron RadioRA into SmartThings. The integration is based on an Arduino Mega 2560 with ThingShield and RS232 shield connected via serial cable to a Lutron RadioRA RA-RS232 interface. One very cool thing about the integration is that all of the hardware connects via RF – there is no wiring involved. The integration is clean and does not interfere at all with the normal functioning of the Lutron system. If it is removed, or …

If Lutron Caseta integration is necessary to your project, I would look into Staples Connect instead. Or HomeKit (perhaps with the Insteon HomeKit bridge thrown in as well).